26
Central Valley / Re: Proppys test and tune
« on: February 28, 2009, 07:28:55 PM »
I am bringin my gps with new batteries, just incase proppy "accidentally" forgets his..
Ironman
Ironman
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
27
Central Valley / Proppys test and tune
« on: February 28, 2009, 06:47:43 PM »
Thats right fellas, propless is finally goin to get the Eliminater wet tomarrow (feb 29th) .I am draggin my sled up there as the safty boat. We should be up at Pine Flat around 11:00 am , lets hope for some clear skys ( it might rain) and hope that biatch floats 
I will make sure to take the cameras and lots of pics ( for proof) and some vids. Wish Proppy luck he might need it.....
Ironman
I will make sure to take the cameras and lots of pics ( for proof) and some vids. Wish Proppy luck he might need it.....Ironman
28
Projects / Re: Eliminator Sprint
« on: February 25, 2009, 07:19:34 AM »You better get out in your garage and get my safty boat running !! I'm ready to GO !!
No shit...... been to busy making rail kits and custom boat parts for other people to even work on my own crap.. LOL
I just hope it remembers how to float.
29
Projects / Re: Eliminator Sprint
« on: February 24, 2009, 10:46:37 PM »
way to go proppy, I'll be over sunday to here that beast run. Bout friggin time, now I have to deal with my carb issues and we can go piss of the fisherman at pine flat.... HELL YA......
30
Projects / Re: Eliminator Sprint
« on: January 28, 2009, 06:32:10 AM »
Lookin good proppy, let me know if you need a hand rebuilding those carbs...
Ironman
Ironman
31
Project Boats For Sale / Re: southwind tunnel hull
« on: August 29, 2008, 07:27:32 AM »
Very interested, post some pics please
Thanks,
Billy
Thanks,
Billy
32
Random Boat Parts For Sale / Re: Intake Loader Grate for JC, JG
« on: July 18, 2008, 12:02:16 AM »
bump
33
Projects / Re: Here's my 78 Brendella
« on: June 15, 2008, 06:07:33 PM »
I still think the duct tape and silicone will hold
Ironman
Ironman
35
Projects / Re: Here's my 78 Brendella
« on: June 14, 2008, 01:54:10 PM »
You might want to use a touch more duct tape and it should be good to go
36
Projects / Re: Here's my 78 Brendella
« on: June 14, 2008, 12:48:48 AM »
sorry it took so long to get it to ya
37
Projects / Re: Here's my 78 Brendella
« on: June 08, 2008, 11:38:32 PM »
Here is a pic of your pump brace John, it will be goin out this week.. comming at ya
38
Central Valley / Pine Flat 6/07/08
« on: June 06, 2008, 05:48:48 PM »
There will be a few of us jetters out there this weekend hanging out around sycamore (sp)so stop in and say hi.. Look for my boat
39
Projects / Re: Eliminator Sprint
« on: June 04, 2008, 12:13:48 AM »
I've got the motor plates scheduled to go on the waterjet friday, so if all goes well should have them by this weekend
40
Projects / Re: Eliminator Sprint
« on: June 03, 2008, 06:06:51 PM »
I realy dont want to have to tow your ass around just so you can get your ride on the water so get off the computer and get your friggin boat done already.
so get off the computer and get your friggin boat done already.
41
Random Boat Parts For Sale / Intake Loader Grate for JC, JG
« on: May 31, 2008, 01:03:28 AM »
These loaders fit Berkeley JG, JC, and some other pumps as well. I have the same one in my boat and it works very well. This one is for Propless ( Don't worry Jeff I am not sellin yours ) but I have 4 more just like it. The main structure is made from 1/4 A36 plate and the fins are made from 1/8 A36 plate. All pieces were cut on the waterjet, assembled and welded. The 4 attaching holes are for 5/16-18 flat head socket screws ( NOT INCLUDED ). It is recomended that the the 4 bolt holes that are in the intake be drilled thru and tapped for 5/16-18 x 1-1/2 steel flat head socket screws and 5/16 loc nuts be used to attach the loader to the intake. Comes primed and ready for the finish of your choice.
Price is $125.00 plus shipping
Thanks
Billy
BDS Machining 559-903-5456
) but I have 4 more just like it. The main structure is made from 1/4 A36 plate and the fins are made from 1/8 A36 plate. All pieces were cut on the waterjet, assembled and welded. The 4 attaching holes are for 5/16-18 flat head socket screws ( NOT INCLUDED ). It is recomended that the the 4 bolt holes that are in the intake be drilled thru and tapped for 5/16-18 x 1-1/2 steel flat head socket screws and 5/16 loc nuts be used to attach the loader to the intake. Comes primed and ready for the finish of your choice.Price is $125.00 plus shipping
Thanks
Billy
BDS Machining 559-903-5456
42
The No Wake Zone / Re: Pine Flat , memorial weekend
« on: May 23, 2008, 11:20:08 PM »Drood ? I have no idea what you are talking about
There were NO and I repete NO jetaholics on the water today
Amen to that....No jetaholics were invited, wouldn't want to Fock up a perfectly good day!
Ironman
43
Projects / Re: Eliminator Sprint
« on: May 17, 2008, 01:24:34 AM »
Yep, that is some heavy duty aluminum thats for sure. I picked up some for some rail kits that I will be making. Sure was a shame to cut it up for scrap. I probably cut up 400' of it but I stashed some in the shop just in case 
44
Projects / Re: Here's my 78 Brendella
« on: May 17, 2008, 01:19:48 AM »
That would be me, and thanks for the complement(sp). I think I am getting ready to cut another part for ya also, well for Tom at JBP ....Keep the progress pics comming...
Ironman
Ironman
45
WarZone / Re: Note on a refrigerator
« on: May 17, 2008, 01:12:42 AM »
That's some funny shiat right there..... 
46
The No Wake Zone / Re: What do you do for a living??
« on: May 17, 2008, 01:09:14 AM »
Just started a Machine Shop ( Job Shop ). Do alot of one off specialty parts and small production runs, all types of welding & fabrication, and Waterjet Cutting.
Ironman
Ironman
47
Projects / Re: Here's my 78 Brendella
« on: May 06, 2008, 07:44:29 PM »
Nice to see those plates installed. Your whole project is turning out bitchen. A little tip for ya, when cutting the aluminum with a router give the area you are cutting a little shot of wd-40, helps the aluminum from welding itself to the carbide bit and a better edge. keep the pics coming
Ironman
Ironman
48
WTB / Re: Single full length swim step
« on: March 22, 2008, 12:11:36 AM »
I can water jet cut one out of aluminum for ya, but it could get kinda pricy due to the cost of the alum and depending on length, width, thickness of material. If you are interested(sp) shoot me some dims and I can figure something up for ya. Just a thought...
Ironman
Ironman
50
Engine Mechanical / Electrical / Re: fuel pumps
« on: February 12, 2008, 08:48:56 PM »For Gen4 get the Clay Smith mechanical. It is the most solid and reliable pump out there for 300-1300HP.
http://www.claysmithcams.com/index.asp?Category=254&PageAction=VIEWCATS
That is what i would run if I had a gen4. I have to run an electric pump due to the fact I am runnin a Mark5 block. Stay away from Holley electric pumps. If you are dead set on runnin an electric pump go with an areomotive .