Hardcore new 496ci 750+HP Premium build just starting , engine will be ready to dyno in two weeks from date of this post.

Block GM Gen 6 cleaned and maged, bored and honed with torque plate, square decked and align honed with ARP main studs
Crank Lunati Forged (8 counter weight forging)
Rods Lunati H beam with ARP2000 bolts
Pistons Racetec 2618 forged 20cc dome (10.8:1 with 119cc heads)
Cam & lifters Lunati solid roller
Timing set Billet wit torrington trust
Timing cover polished
Oil pan Canton 10QT with Melling HV pump
Heads RHS320 custom ported and built with Comp valves, springs , retainers and locks
Head bolts ARP
Intake Edelbrock Victor
Carb Holley 950XP black
Distributor and wires MSD marine
Gaskets Fel Pro
Damper Pro Race
Valve covers Polished Marine

Price $11950 (you can make payments if you like, at this stage we only need a down payment to reserve the engine)

Cal Andy at Hardcore Racing & Marine Engines
909 851 8251

More pics

Hi yes we sell parts and better than Summit pricing due to our WD pricing and low overheads below is a quick list of what we do

Pistons Autotec Racetec (wayne brooks company which he was formally owner of JE/SRP)
Cranks & rods Lunati Voodoo and signature series, Callies Compstar/Magnum, BME, GRP
Rings Total Seal plasma, TNT, Gapless
Rotating assemblies with any mixture of above components
Cams and valve train Lunati, Comp cams, Crower, Iski
Oil pans Canton
Heads RHS Plus we have our own custom built RPC heads with SI valves and Comp springs ect
In house head porting your heads or ours
Plus all usual parts bearings, oil pumps ARP ect

Machine work
Bore and hone with T plate
Crankshaft balancing
Align honing
Align boring
Cam tunnel boring 50, 55, 60, 65 or 70mm
Lifter bushings .842, .875, .904, .937 0r 1.062
Custom valve seat work plus custom valves

Just a quickie list

Andy Hardcore Racing & Marine Engines

 

Hardcore Racing & Marine Engines 909 851 8251 Andy

BBC Hi Performance short block KIT $2450, kit comes with everything to complete and can be assembled and blueprinted to marine specs by us for a extra $250

BLOCK
Cleaned and magged, bored and honed + 060, square decked and mainline checked, new cam bearings installed and brass freeze plugs

CRANK
Crank is a Eagle cast steel and has been balanced on the latest Hines digital balancer

RODS
Scat forged I beam Rods with ARP bolts(good for 700HP)

PISTONS & RINGS
Pistons are Autotec 4032 forged , these are the latest narrow strut skirt design and made right here in CA by Racetec pistons (formally J.E./SRP) , Rings are Total Seal and are 1.5-1.5-3mm modern metric sizes

Kit come complete with bearings and a NEW damper

ALL kits come with bearing clearances set and rings gaps ground so it tales any guess work out of the DIY persons mind that wants to take on his own build, we are here to advise and design the rest of your build!

We have 30+ years experience in Hi Performance engine building and have built from 300-3000 HP combinations in Boats, Street, Oval track, Off road rails and Drag race applications

Call 909 851 8251

Selling full set of scorpion roller rockers $120 only 20 hrs on them . Went with a different rout with the motor and bought a set of crown golds .


Sent from my iPad using SoCal Jet Boats

Do you still have these, if so please call 909 851 8251 thx Andy

Ford 460 short block and Dove heads for sale

BLOCK
Cleaned and magged, bored and honed + 030, square decked and mainline checked, new cam bearings installed and brass freeze plugs

CRANK
Crank was cleaned and magged then reground and micro polished then balanced on the latest Hines digital balancer

RODS
Rods are forged Ford and have been cleaned blasted and shot peened, then resized with ARP bolts

PISTONS & RINGS
Pistons TRW forged with moly rings

HEADS
cleaned and magged three angle valve job, guides honed and resurfaced, NEW stainless steel valves and assembled

Price
Short block $1450  assembled
Heads $900

909 851 8251


We have 30+ years experience in Hi Performance engine building and have built from 300-3000 HP combinations in Boats, Street, Oval track, Off road rails and Drag race applications

Olds 455 (Hardin) Hi Performance short block KIT , kit comes with everything to complete and can be assembled and blueprinted to marine specs by us for a extra $250

BLOCK
Cleaned and magged, bored and honed + 030, square decked and mainline checked, new cam bearings installed and brass freeze plugs

CRANK
Crank was cleaned and magged then reground and micro polished then balanced on the latest Hines digital balancer

RODS
Rods are forged Olds and have been cleaned blasted and shot peened, then resized with ARP bolts

PISTONS & RINGS
Pistons are Autotec 4032 forged , these are the latest narrow strut skirt design and made right here in CA by Racetec pistons (formally J.E./SRP) , Rings are Total Seal and are 1.5-1.5-3mm modern metric sizes

Kit come complete with bearings and a NEW damper $1950 or $2150 assembled

ALL kits come with bearing clearances set and rings gaps ground so it tales any guess work out of the DIY persons mind that wants to take on his own build, we are here to advise and design the rest of your build!

We have 30+ years experience in Hi Performance engine building and have built from 300-3000 HP combinations in Boats, Street, Oval track, Off road rails and Drag race applications

909 851 8251 Andy

I will take the heads and intake for $200 if that works for you, were are you located? i will IM you my number

Do you have any complete BBC for sale & what do they have for components, thanks

Hi yes i have a 496 short block NEW with Gen V block, eagle steel crank, eagle I beam forged rods and Custom forged pistons, moly rings, Speed Pro bearings, cam bearing and freeze plugs installed in the block, its all machined just needs assembled, you can buy as a kit $2700 or i can blueprint it and assemble $2950, this is designed for Alum 119cc heads with 11:1cr to run on 91 octane fuel

Also have a 496 complete engine being built right now designed to run on 91 octane, with Eagle steel crank, H beam forged rods and Probe forged pistons, ported Iron "394" GM marine heads, its a hyd roller motor and will be about 450HP wil come with Weinad intake and Demon carb and polished Marine valve covers, also comes with MSD Marine distributor and Taylor 9mm wires $6500

21ft Eliminator Mohave open bow with 4 seat cutty cabin, this boat only has 300hrs use and is in great condition and comes with Bravo 1 out drive and newly built BBC 474ci motor 450HP(not installed but has everything to install)

General
The boat is fully equipped and everything works great, it has a new windshield, a good stereo system and seats up to 13 people that makes it a good fast boat when you want and a good party boat when at the river, hull registration is up to date until Dec 31st 2016

Hull
Hull is in perfect shape no damage or repairs

Interior
Interior is in good shape and very usable but has a little fade

Out drive
Bravo 1 is in great shape and ready for use

Engine (not installed cost $6000 to build)
Engine is a BBC 474ci motor custom built blueprinted for marine use by Hardcore Marine Engines with 450+HP, it has forged rods with ARP bolts, Hi-Performance pistons and rings, aftermarket cam and lifters, 8 qt oil pan with HV oil pump, heads are Oval port with new stainless steel valves and 3 angle seats and re-surfaced, Edelbrock Endurashine Performer RPM Air Gap intake with Holley HP carb

Trailer is in great shape new custom Alum wheels with new tires all around, brakes have been serviced, trailer is tagged and good to go

I was doing this boat ready for next year for my family but were opening a new business so we have to sell the boat, it will make a great lot of fun for someone, its a small project to install the engine as 95% of the work is done and nothing to buy to finish just some labor, i will consider trades for bikes, cars, trucks, jet skis ECT with cash my way, thanks for looking Andy

$11950 cash or trade or trade + cash for 2004 or newer truck or SUV, text me pics if you have a trade, thanks Andy

Call or text Andy 909 851 8251

Hardcore Marine has the following engines for sale, they are all short blocks and can be sold as that or can be custom built to complete engines, we have some Budget builds that are in the 450-550HP range and some more expensive that are capable of making 650-HP

CALL OR TEXT ANDY 909 851 8251

Budget BBC Gen IV 474ci short block assembled
Block is a virgin core and  cleaned and magged the bored 4.350 and honed to our specs for marine use then square decked, mainline checked for size and alignment  then cam bearings and freeze plugs were  installed

GM cast Crank 020/020 with Speed Pro performance bearings, GM forged Dimple rods with ARP bolts  & Speed Pro Hypertectic Pistons with Mahle Moly rings

Price $2450 SAVE $700 NEW YEAR DEAL $1750

short block can be custom assembled complete, we have Oval port heads fully machined with stainless steel 1 piece valves complete with intakes, carburetors , oil pans, distributors for under $5000 ready to run


BBC Gen v 496ci short block (up to 650HP)
Block is a virgin core and cleaned and magged then bored and honed to our specs for marine use then square decked, mainline checked for size and alignment  then cam bearings and freeze plugs were  installed

Eagle Steel crank with 4.250 stroke and Speed Pro performance bearings, Eagle I Beam forged Rods, Auto Tech 4032 forged pistons and Total Seal rings, Rotating assembly has been dynamically balanced

Price $2650

any of the engines i can make complete i have all the parts needed ready to assemble, i have some very low use GM Marine "394" heads which have had fresh valve job, resurfaced and ported, Intake is a Weiand Stealth and carb is a Demon 750, i have Polished alum tall valve covers angled for wet headers, a MSD distributor with Taylor 9mm wires price is $6500 for the 505 or $6200 for the 496

Ford 460ci long block with cam lifters and DOVE heads
Block is a virgin core and  cleaned and magged then bored and honed to our specs for marine use then square decked, mainline checked for size and alignment  then cam bearings and freeze plugs were  installed

Crank, Rods & Pistons
crank is cast 020/020, forged Rods with ARP bolts, forged TRW pistons and Total Seal rings, Rotating assembly has been dynamically balanced

Heads are DOVE and have new guides installed with stainless 1 piece valves, fresh 3 angle valve job and re surfaced, heads were built with new valve springs and installed on the short block

Price $3000

Short Block Assembly(all short blocks)
Our assembly is done to very strict tolerances, every bearing is installed in the block and rods and measured for correct clearance for the application, Rings are always +.005 over bore size and they are all gaped to our specification per application, all assembly is done with long lasting Brad Penn assembly lube