4726
Projects / Re: Project Miller 2 (customers)
« on: October 03, 2007, 07:11:27 PM »
Im having a trailer dilema and i think im in love with those fenders.
Is that wrong?
2sav
Is that wrong?
2sav
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
4727
WarZone / Re: GAWnCA Vs oldrigger - 700HP motor for $1500
« on: October 03, 2007, 07:06:45 PM »Where's the proof???
[/quote
Fixed it for ya,
but thats no lie, i would love to do it.
2sav
4728
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 03, 2007, 07:01:08 PM »It sure is funny how much Omar really knows, as he sits back and listens more.
He has way more insight than most on this forum. But he usually refrains from coment.
Thats the way to do it, sit back and be a sponge, and then when its time to wring it out. Everybody gets their ass kicked
Go Beerjet Go
2sav
4729
The No Wake Zone / Re: Waste more time here .
« on: October 03, 2007, 06:53:25 PM »
This has happened a few times on Ebay as well. Its complete BS.
Pretty bad that you have to watch who you sell your stuff to nowadays, could come back to haunt you
2sav
Pretty bad that you have to watch who you sell your stuff to nowadays, could come back to haunt you
2sav
4730
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 03, 2007, 11:26:04 AM »
Brad,
Its refreshing to see you care about jim the other's and all involved.
2sav
Its refreshing to see you care about jim the other's and all involved.
2sav
4731
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 03, 2007, 11:13:11 AM »
Give me a few, i will be there.
2sav
2sav
4732
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 03, 2007, 11:09:42 AM »Steve I think we can dod some sanding and spray some speedcoat today. Being you are not coming out to the race get over here and get stoned off speedcoat with me.
But i have to get my hair cut
2sav
4733
Engine Mechanical / Electrical / Re: 455 OLDS Heads
« on: October 03, 2007, 09:11:27 AM »Its stamped "K".
you are good to go. Have them worked
2sav
4734
Engine Mechanical / Electrical / Re: 455 OLDS Heads
« on: October 03, 2007, 09:10:34 AM »The K's and the Ka's are marine heads.
Yes he is correct i run the 'k' heads on mine. But you do not have to have marine heads per say.
it all depends on what you are running as far as performance go's. I mean if you have the small valve units or the smog heads 'j' heads. Run away from them they are crap for performance and will only choke your engine. These heads should not be on a boat to begin with, but you never know what the guy before you has done.
So if you are thinking about buying aluminum heads to build a race motor, Great.
But if you just want more power and already have the big valve units. My opinion find a good maching shop and have them worked.
I can go on and on but really dont know what you are looking for? Are you building a motor? or just doing a top end. If thats the case you will regret it later when the bottom end starts to knock because you just raised your compression back up and the bottom end was comfy with what it had.
But then again NEED MORE INFO
2sav
4735
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 03, 2007, 08:45:32 AM »I had a very hard time keeping it from spinning out and MPH is still down.
That video SUCKS! Dont show chit, thats all that boat seemed to do in the turn
I dont think that boat could make a turn if it had its blinker on
Hell i will give you that brown boat in my back yard, I bet it will turn
Not trying to be hard on Jim but dam man, im bummed!
2sad
4736
Engine Mechanical / Electrical / Re: 455 OLDS Heads
« on: October 02, 2007, 07:33:50 PM »
What heads are they? There is a letter on the corner of the heads what is it. That will help
2sav
2sav
4737
Trailers / Re: Trailer needed
« on: October 02, 2007, 03:41:00 PM »
HD, Did you ever find a trailer?
im Thinking about selling my tandem
2sav
im Thinking about selling my tandem
2sav
4738
The No Wake Zone / Re: So new
« on: October 02, 2007, 03:06:31 PM »
Hey dont feel bad about getting towed back, at least you are out there doing it I got two jet boats that are waiting to get put back together again and when they are, i can bet money i will need a tow. So get that boat fixed cause i might need ya some day
Oh and by the way, welcome to SoCal.
2sav
I got two jet boats that are waiting to get put back together again and when they are, i can bet money i will need a tow. So get that boat fixed cause i might need ya some day Oh and by the way, welcome to SoCal.
2sav
4739
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 02, 2007, 11:46:13 AM »Great! you all ready to go now?
Sure wish i could make it, But
i got a trailer to finish. And then i got to sand my floor and then,and then,and then one day at band camp Good luck to all
I wish everyone a good safe race.
Just watch out for the GINSU
2sav
4740
Trailers / Re: Swing away trailer tongue
« on: October 02, 2007, 11:13:57 AM »Sounds good. Take some photos and show us better ways of doing things other than a bolt on kit.
+1 photo's
2sav
4741
Trailers / Re: Swing away trailer tongue
« on: October 02, 2007, 08:19:10 AM »
I just want to buy a kit and have it installed. I dont want to try to make it fit or fabricate it.
But the ones i see above are only weighted at gross 3500 pounds. I have a tandem now and want a little higher gross weight, or is the 3500 gross weight normal? I really dont know what weight is normal and i dont want my chit coming of my truck on the highway or sumthin because i was CHEAP.
I see these on trailers all the time, but i cant find the one i want or have seen. Im going to Holiday Rv and Marine and talk to them. As much as they rip people off they might be able to give me a clue
Thanks.
2sav
But the ones i see above are only weighted at gross 3500 pounds. I have a tandem now and want a little higher gross weight, or is the 3500 gross weight normal? I really dont know what weight is normal and i dont want my chit coming of my truck on the highway or sumthin because i was CHEAP.
I see these on trailers all the time, but i cant find the one i want or have seen. Im going to Holiday Rv and Marine and talk to them. As much as they rip people off they might be able to give me a clue
Thanks.
2sav
4742
Trailers / Re: Swing away trailer tongue
« on: October 02, 2007, 04:19:54 AM »
Why is it every time i type in "swing away tongue" all i get is the swing in jack for the trailer?
I cant find sh!t
2sav
I cant find sh!t
2sav
4743
WarZone / Re: SCSC 2007 Season Finals Smack Talk Thread
« on: October 02, 2007, 04:16:27 AM »put the diverter up and hit the switches!! Front and back and side to side, gangsta style!!!
LMFAO2sav
4744
The No Wake Zone / Re: Found 1983 Starbuck 455 jet boat..OK???
« on: October 01, 2007, 02:43:14 PM »
Nice trailer
2sav
2sav
4745
The No Wake Zone / Re: Found 1983 Starbuck 455 jet boat..OK???
« on: October 01, 2007, 11:43:06 AM »It's a 18' with a Berkely. Are they good boats? Better than my 1973 Kona? Pluses and minuses?
I can get into this one for $750 in good shape xcept for a bad motor.
Thanx
Whats wrong with the Kona???
2sav
4746
Random Boat Parts For Sale / Re: Looking for some Berk parts...
« on: October 01, 2007, 10:28:09 AM »I would be interested in one with a pulley.
Well I didnt hear anything from you, so they are on Ebay now. With other stuff
2sav
4747
Projects / Re: Fantasy project
« on: September 30, 2007, 07:43:37 PM »what are you guys smokin on in the first pic ?
Gonja man
2sav
4748
The No Wake Zone / Re: Can you cut Bassett headers?
« on: September 30, 2007, 07:01:03 PM »just bring me a 40 oz and come on over we can cut em on my band saw worry aout the rest later
What you want? Colt45 or the OLD ENGLISH.
Thats straight up porch beer
eight ball baby.2sav
4750
The No Wake Zone / Re: Can you cut Bassett headers?
« on: September 30, 2007, 02:16:50 PM »
Whats it cost to have you cut them off?
2sav
2sav