[2savage4you]

I am looking forward to using my new Ginsu Knife, these things are razzor sharpe

I likey the new Ginsu

I will be down in a bit, im swapping trailers finally


2sav

[Ema Non-Performance Marine - BANNED]

no?

OK

[Brad @ SCJB]

I dont know if im seeing that right.....but is that mounted on the starboard side? if so, whats the reason for mounting it there and not center? just curious.

[Ralph Brunt]

yeah i see the same thing, he must know sumthin nobody else knows. sure hope it dont hook

[2savage4you]

Its centered   you guy's are breathing in too much SMOG
But then again, is it?

2sav

[Ema Non-Performance Marine - BANNED]

Steve, is it windy over there ? I want to test this thing but it is blowing about 50mph here.

If you guys look real close you can see the keel line and the fin is dead center.

[Brad @ SCJB]

If you guys look real close you can see the keel line and the fin is dead center.

i think whats throwing me off is the long - shorter depth fin behind it....at first look it looks like your startboard side intake fin and its lined up with that.

so you have 2 fins that are running on your keel? maybe post another picture from a different angel....or i will just check it out next weekend.

[hotrod56cars]

Jim I couldn't help but notice that the paint on the boat'saxle is chipped? Hmmm... must be a race boat! 

BTW, I think the "second fin" we're seeing is the port side intake fin and the starboard side fin isn't in the picture.   

[HDriderTH]

Looks like a hydrofoil to me....

[Ema Non-Performance Marine - BANNED]

Jim I couldn't help but notice that the paint on the boat'saxle is chipped? Hmmm... must be a race boat! 

That is Sea Goin Epoxy drippage.

[Ema Non-Performance Marine - BANNED]

Well after some testing the engine is back out and the thrust Bearing (Thanks Tom) is being replaced, do to a strange faint humming sound as well as the wear ring to a shouldered one to tighten the pump up.

[Brad @ SCJB]

stay on top of it....you got a few days left!

[Ema Non-Performance Marine - BANNED]

Done,  Thanks to my crew, Steve, Tony, Donna, Sherleen and Amanda. Tom thanks for the call. Well it is test time tomarrow. We will get to see how it works. Ralph thanks for the shared info.

[pw_Tony]

Test time is always fun time 

[Ema Non-Performance Marine - BANNED]

Not sure if we are testing  carbs too or just the new set-up. I just hope we have enough daylight. I will say this is about the most anal I have ever been when it comes to a pump. I got the # I wanted, thanks to my crew. I just hope all the hard work pays off.

The crew for the 300 is looking good we even have my crew chief coming out from Idaho. Watch for a good finish this year.

[lilrick]

Yeah , Yeah , and the next guy that try's to lap me is gonna get wet too! Bitches ! 

-beerjet-

put the diverter up and hit the switches!! Front and back and side to side, gangsta style!!!

[2savage4you]

put the diverter up and hit the switches!! Front and back and side to side, gangsta style!!!

  LMFAO


2sav

[MADSKILLZ]

Hey Jim. When is your crew going to show up on race day? Just thought I would ask

[Ema Non-Performance Marine - BANNED]

Nick, we should have a gang of folks at the races this weekend.

[MADSKILLZ]

Great! you all ready to go now?

[2savage4you]

Great! you all ready to go now?

Sure wish i could make it, But i got a trailer to finish. And then i got to sand my floor and then,and then,and then one day at band camp

Good luck to all
I wish everyone a good safe race.

Just watch out for the GINSU

2sav

[Ema Non-Performance Marine - BANNED]

Great! you all ready to go now?

We are testing today if the wind dies down a bit, about 15mph right now.
I think we will be just fine for the race.

[MADSKILLZ]

you should test in the wind that way you are ready for parker too

[MADSKILLZ]

It always seems to get windy there

[pw_Tony]

I'm gonna do my best to make this one too!