Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - IRRebel

Pages: 1 ... 34 35 [36] 37 38 ... 223
876
Engine Mechanical / Electrical / Re: help stop the chirp
« on: June 21, 2011, 12:10:46 PM »
no I mail ordered it from Atlantic speed shop in South Carolina and they claim that there are 3 manufacturers of lifters in the world and Comp cams use all 3 and from time to time 1 or the other will change spec so Im sol

Welp, look over the cam pretty good! I'd be a little nervous knowing that, lube and prime the hell outta the engine and follow the normal cam break in procedures. Prolly be OK. Flatten a cam that you're already SOL on anyway I guess is the next to worst that could happen. I'd personally change the oil a couple times and filters, make sure you add the comp break in additive, after a few days of running, again, cutting the filters open for shits and giggles.

Ray

877
Engine Mechanical / Electrical / Re: help stop the chirp
« on: June 21, 2011, 11:54:45 AM »
i gotr a tube of cam lube to change all the lifters but they all appear to be the same wrong size
 :banghead:

Did you buy the cam kit from the same place? If so, I'd have em replace the whole cam kit and replace it all...........just me!  ;)

Ray

878
that first one is interesting.  long intake runners without having a tunnel ram type setup. 

i was under the impression that short intake runners for high rpm is the way to go.  its not like our jet boats spend much time at low rpms...

Very much like the old crossrams of the 60's/70's used on the SCCA cars !

Ray

879
Engine Mechanical / Electrical / Re: help stop the chirp
« on: June 21, 2011, 11:50:46 AM »
so i go to my local speed shop to order new lifters and from a sealed box comes lifters the same diameter but about 3-16ths inch longer. we opened 2 other sets ,same result so I went to another parts store ,they had a set ,opened the sealed box and same thing again.So now it looks like Ive had the wrong lifters all along which could expliain all the lifter noise we could not get rid of and the failed lifter and pushrod problems. Now Im faced with putting new lifters on a broke in cam  wtf.

I think now you need to pull ALL the lifters........could be all mix and match in there........ :screwy:

Glad you found that clip! I'd still cut open the oil filter just for a look see JIC though...... ;)

RAy

881
Random Boat Parts For Sale / Fiberglass swim deck
« on: June 21, 2011, 05:49:48 AM »
Wasn't someone looking for one of these?

http://phoenix.craigslist.org/cph/boa/2452025701.html

Ray

882
Events / Re: Father's Day Float 2011 (aka Big River!)
« on: June 20, 2011, 08:38:48 PM »
When you disassemble it make sure it isn't something simple like a loose flex plate or ?

OOOOOH! Good idea! Driveline or bad balancer maybe?  :thumbup:

883
Events / Re: Father's Day Float 2011 (aka Big River!)
« on: June 20, 2011, 05:18:18 PM »
Hopefully it's just minor gremlins for you Nordie, I didn't hear any sort of a knock when we were in the cove.

Me either, but there was one in the parking lot.

Ray

884
Engine Mechanical / Electrical / Re: help stop the chirp
« on: June 20, 2011, 12:05:46 PM »
intake still on Ray. machine shop says possible too much valve spring pressure but who knows. dont understand why its only 4 that are burnt could it be too long a push rod???? I know we had a hard time getting the right lenghts to get the valves to open and close right I think we had to use 4 differant sizes thanks Ray

Are the burned ones from the same area of the engine?

885
Engine Mechanical / Electrical / Re: help stop the chirp
« on: June 20, 2011, 11:32:12 AM »
I just removed the valve covers to investigate the chirping sound and dont like what I found. I had 1 broken rocker arm bolt and  the push rod was slightly bent. I also have 3 other pushrods that are blue at the rocker arm but fine the rest of the way and they spin in the holes. when we assembled the engine we had a hard time getting pushrods the right length for setting the valves  and ended up using sveral differant lengths of rods. Are they too long or too short the 4 blue ones dont seem to get oil to the top is this because they are too short too make a seal and oil does not come up the rods or something else I m lost help please

Blow through the pushrods to make sure they're clear, first. Then I'd fire up my drill and a priming stick with the rods out to make sure I'm getting oil out the lifters. Intake still on it?

Ray

886
Events / Re: August event
« on: June 20, 2011, 11:27:51 AM »
getting no cooperation from avi. they told me last wed they would do it up and email me. I called fri no reply called this morning talked to the same girl as last wed she said they were going to email it but forgot or something that was at 9.00 am still nothing now. I have to put up a non refundable $250 deposit and commit to 15 rooms the new minimum  and the girl whose number you gave me does not work there anymore so far Im unimpressed with the Avi

Hell, they SHOULD love us! The women were all gambling while we bench race in the parking lot.......I don't think the place would be THAT full at that time of year........ :screwy:


Ray

887
I'm with Proppy and Glenn. And yeah, it looks extensive and expensive.

Might be time to look for another hull for your project, otherwise, yeah, it's coming completely apart to fix all this   :banghead:

Ray

888
Engine Mechanical / Electrical / Re: Poll twin turbo or 8/71
« on: June 16, 2011, 07:37:19 PM »
You thought you threw it over the fence....I was on the other side with a baseball mit and caught it!    never touched the ground!

I did not to be the first to tell you, but the headers are on backwards! :screwy:  LOL!......oh wait, thats for in the winter they act like a heater O0

Nah, I think he's gonna use the hairdryers for....well......Hairdryers!    >:D

Ray

889
Engine Mechanical / Electrical / Re: Poll twin turbo or 8/71
« on: June 16, 2011, 04:58:24 PM »
I put the turbo headers on this week and threw the blower over the fence into the neighbors yard!

 :screwy:

Ray

890
Events / Re: Father's Day Float 2011 (aka Big River!)
« on: June 16, 2011, 01:48:38 AM »
Me too Dave, me too....... :banghead:

Ray


the best part is i get to read this while im writing a paper for school, that is due monday. but since im going to the river i need to do it tonight. Seeing everyones pictures and post how they are all ready to go is great motivation to continue on this paper  :screwy: :thumbdown:

The Beav

Better get to it! When Mrs Crewcheif says "better have yer shit clean" she ain't kidding....... ;D

Ray

891
Events / Re: Father's Day Float 2011 (aka Big River!)
« on: June 15, 2011, 11:36:27 PM »
Just pulled in....had a flat on the trailer on the way out, (good thing i snuck into ralph's backyard to steal a spare this afternoon....thanks ralph) but otherwise uneventful...

Ralphs got new aluminum heads, he ain't gonna care..........well, unless you took a tire off the "family" boat.....that could be a problem......  :sly:

Keith, tell Michelle I'm gonna bring out my new toy as well. I was hopin Chromey was gonna be there to use it, and show ME how to use the friggin thing more importantly, But if' she's wanting to do this I'm gonna bring it anyway.  :thumbup:

Me too Dave, me too....... :banghead:

Ray

892
Random Boat Parts For Sale / Re: BBF Complete top end/Aluminum heads
« on: June 15, 2011, 10:51:42 PM »
Ralph gets all the good stuff!  :'(

Ray

893
Events / Re: Father's Day Float 2011 (aka Big River!)
« on: June 15, 2011, 10:35:05 PM »
Alright everybody, Michelle says she is going to bring her good camera and a tripod.  She'll be getting some pics of the boats and trying for some shots with cool effects and backgrounds (rainbows in roosters  :thumbup: ).

She said, be sure tell everyone to "clean there sh!t"  ;)

Is she bringin the models too??  ::)

Ray

894
Boat Showcase / Re: Lets See Your Rides
« on: June 15, 2011, 10:30:07 PM »
Looks REAL nice!!  :thumbup:

Ray

895
Sand / Re: Project B.A.M.F
« on: June 15, 2011, 05:29:27 PM »
I got a set of LS1 blower pistons........ >:D

Ray

896
Events / Re: August event
« on: June 15, 2011, 12:07:23 PM »
I called the AVI and they have a new policy. instead of 10 rooms for a discount you have to book 15 rooms and I had to put up a $250.00 deposit to do it. The rates are thursday Aug 18    $26.10
                                                Friday Aug 19         $80.10
                                                Saturday Aug 20    $89.10
                                                Sunday Aug 21       $26.10


Not sure if enough will be interested but Im commited to coming and if we cant get enough we have to add 10% to those prices. I will be posting  a reservation code when they send it to me tomorrow

I'm still in! But "Policy"??? Ask Rivertard and my son about "Policy" there............... :sly:

Not sure, but I'm willing to bet we had 30 rooms or so last time I was involved in this.

Ray

897
Engines / Engine Parts For Sale / Re: Olds Overtransom headers $150
« on: June 15, 2011, 12:01:38 PM »
I will check it out tonight.  When I follow someone in there wake it has a mind of it's own.  Can I send you like ten buck or so via paypal and you can send it out??? ;D

Nope, Just PM me the addie. People like 75Fantasy have done the same for me. Can't charge for a useless piece to me......

Ray

898
Engines / Engine Parts For Sale / Re: Olds Overtransom headers $150
« on: June 15, 2011, 11:50:35 AM »
want to sell me one? my tahiti was all over the place this weekend.

It's yours.....I'll bring one.....we'll talk about $ later if it works,,,,,,,,,,,I'm thinking FREE..........who's coming that I can give it to to get it to ya tho?

As far as being all over the place.........crawl under the boat.........are the fins on the intake intact?   :screwy:  Sounds strange to me......

Ray

899
The No Wake Zone / Re: Parts transfer, part XXVLI or something
« on: June 15, 2011, 11:43:11 AM »
I could put it in the back seat next to Rebecca but that probably wouldn't fly.

 :thumbup:

The other 'Becca's coming!!!!! YAY!

She gonna ski this time?

Ray

900
Engines / Engine Parts For Sale / Re: Olds Overtransom headers $150
« on: June 15, 2011, 11:36:41 AM »
Yup! regular pump, no Place Diverter? I got a couple

Ray

Pages: 1 ... 34 35 [36] 37 38 ... 223

Null

SMFPacks CMS 1.0.3 © 2026