Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - BROKEDIK

Pages: [1] 2
1
Boat Racing / Re: 2015 Long Beach Sprint Nationals PHOTOS
« on: August 12, 2015, 06:06:13 AM »
After the bump in the turn he almost got back to the ramp

2
WarZone / Re: I need to vent!! Please chime in..
« on: July 12, 2015, 08:18:01 AM »
Well coming from a guy who has fought in both Iraq and Afghanistan I can guarantee that I will not allow that shit to happen in front of me. I have lost too many good brothers fighting to keep our way of life. I also sleep well at night knowing that there are hundreds of thousands of our offspring keeping up this standard everyday and night around the globe.
RIPKIA (Rest In Peace Killed In Action)

3
The No Wake Zone / Re: Water level in Parker
« on: July 09, 2015, 08:08:29 PM »
Then 935 for me lol

4
The No Wake Zone / Re: Water level in Parker
« on: July 09, 2015, 07:23:01 PM »
Heading there now

5
Lower River / Re: Blythe 2015 what's up?
« on: June 29, 2015, 10:14:12 AM »
Until next time

6
Lower River / Re: Blythe 2015 what's up?
« on: June 29, 2015, 10:11:16 AM »
I had a blast too meeting all you guys. I got out in time to miss the wind and lightning. Can't wait to do it all again!

7
Project Boats For Sale / Re: Eliminator sprint everything minus motor
« on: June 29, 2015, 06:33:18 AM »
Haha, beerjet u got me there!

8
Project Boats For Sale / Re: Eliminator sprint everything minus motor
« on: June 28, 2015, 08:53:24 PM »
Love is grand, divorce is 100 grand.
Keep the wife and hide the boat

9
Project Boats For Sale / Re: Eliminator sprint everything minus motor
« on: June 28, 2015, 07:35:46 PM »
Is it stored in chino?

10
Project Boats For Sale / Re: Eliminator sprint everything minus motor
« on: June 28, 2015, 07:28:11 PM »
There is a lot of good parts on a nice hull for 4500. I'm suprised it's been up this long. I better stop looking at it before I go and buy it.

11
Project Boats For Sale / Re: Eliminator sprint everything minus motor
« on: June 28, 2015, 07:07:57 PM »
What impeller is in it?

12
Engine Mechanical / Electrical / Re: Pto bolts?
« on: June 28, 2015, 02:16:25 PM »
You can try King Bolt in Glendora. They are closed today but you can give them a call tomorrow.  They have just about every type and size bolt, nut etc.

13
WarZone / Re: Journeyman Electrician Wanted
« on: June 23, 2015, 02:17:17 PM »
Non Union, sorry should have stated that one.

14
WarZone / Journeyman Electrician Wanted
« on: June 23, 2015, 11:41:12 AM »
Before I throw this out to the public I figured I would check with the SCJB community first. I am looking to hire 2 more Journeyman electricians and possibly 1 third or fourth year apprentice. Must be comfortable with 480 volt panels transformers etc... PM me with your contact info if you are interested or know someone who is. Current job sites are in Fontana, Rancho, Whitter areas and are Industrial Electrical work.

15
Lower River / Re: Blythe 2015 what's up?
« on: June 22, 2015, 10:21:28 PM »
I will be heading up to mcintire early friday. If anybody needs me to bring any tools or parts pm me. I have a lot of spare parts and tools and would be glad to help out.

16
Trailers / Re: Trailer with only a bill of sale
« on: June 20, 2015, 08:30:23 AM »
If you can't get it over there pm me. I have a guy that will come to you and do everything  (for a fee of course). I have used him on 6 or 7 different cars, trucks, boats, trailers ect and he is good and fast. If memory serves me it's about 175 with new pink, plate and sticker.

17
The No Wake Zone / Re: Temp Gauge
« on: June 16, 2015, 01:30:32 PM »
Is there a ground cable from the battery to the block? The ground from the battery should have a cable directly to the block. You can check to see if it's good with a digital meter.  One prong to positive side of the battery and the other to the block. It should read the same as it does from post to post on ur battery. If u don't have a good meter and are in the SGV area I can swing by and give u a hand. Sometimes it just takes a second pair of eyes looking at it to see the obvious.

18
Boats For Sale / Re: I hate to do this...
« on: June 15, 2015, 09:58:20 PM »
Can you text or call me 626 216 6450. My name is Jeff

19
Boats For Sale / Re: I hate to do this...
« on: June 15, 2015, 09:42:28 PM »
Is the Oval for sale?

20
The No Wake Zone / Re: Right way to run batteries?
« on: June 09, 2015, 02:48:52 PM »
My reason for doing this is so I don't need to mess with the perko switch anymore. But on my pontoon boat I ran it similar to how you mentioned. There has just been too many times of me not switching back to recharge both batteries. This way I won't need to anymore

21
The No Wake Zone / Re: Right way to run batteries?
« on: June 09, 2015, 01:12:38 PM »
Also if u need any cables made I have a left over spool of #4 welder cable and the crimper, lugs and shrink tube. I can make u a few cables if u need.

22
The No Wake Zone / Re: Right way to run batteries?
« on: June 09, 2015, 01:07:40 PM »
Blue sea systems add-a-battery. Part number 7650

23
The No Wake Zone / Re: Right way to run batteries?
« on: June 08, 2015, 11:07:10 PM »
I realized I had bat 1 &2 typed wrong in first post and tried to correct it. I follow this site nightly but don't post very often so I screwed up my editing as well but u get the idea. One battery to start and perform all the functions and the other simply for the stereo makes better sense. I will finish making up my mounting plate for the isolator and make a few more cables and post the pics tomorrow night if u want. BTW I got the perco switch and isolator on amazon for @$75. It was the best price I found.

24
The No Wake Zone / Re: Right way to run batteries?
« on: June 08, 2015, 10:58:19 PM »
This post is perfect timing as I am in the middle of this myself on a new(to me) mini daycruiser I just got. The instructions show wiring battery 2 to start and bat 1 to house power. Then a cable from each battery to the isolator so it will let bat 1 always stay charged to start and open the circuit when bat 2 drops voltage. I am in the middle of rewiring this way but after reading GT'S post it makes more sense to just wire the stereo to bat 2 and leave the rest of "house" wiring alone as the stereo is the only thing I want to be sure doesn't kill the battery.

25
The No Wake Zone / Re: Right way to run batteries?
« on: June 08, 2015, 10:53:21 PM »
Sorry last one didn't attach

Pages: [1] 2

Null

SMFPacks CMS 1.0.3 © 2026