19ft howard w/ splitbowl and place deverter

« **Reply #75 on:** January 30, 2010, 05:06:40 PM »

A little more paint gone alot to go what a pain and going through some of my motor parts long way to go on this project

« **Reply #76 on:** January 30, 2010, 05:51:11 PM »

Looks good are you wet sanding it off? or using a stripper?

« **Reply #77 on:** January 30, 2010, 05:52:59 PM »

lite striper a lot of wet sanding

« **Reply #78 on:** January 30, 2010, 05:57:06 PM »

I feel your pain

« **Reply #79 on:** January 30, 2010, 06:02:51 PM »

yea iam sore will need a gel kit have found chips under the paint on the rail easy fix i think five colors on this thing

« **Reply #80 on:** February 01, 2010, 02:40:19 PM »

Whats a good filler primer

« **Reply #81 on:** February 01, 2010, 02:45:07 PM »

If i paint will probibly cap it to

« **Reply #82 on:** February 01, 2010, 02:50:53 PM »

Quote from: honda1 on February 01, 2010, 02:45:07 PM

If i paint will probibly cap it to

Shit if you've got it this far down, capping it would only be another step towards your end goal, I say go for it. As for primer, I really like PPG high fill primer, you'll need to thin it down quite a bit, but it is a great fill primer. I've done 3 cars and chassis with it. Good shit and it's priced right.

PPG Spectracron Products ---> http://www.ppg.com/coatings/truefinish/products/liquid/Pages/102_spectracron.aspx

« **Reply #83 on:** February 01, 2010, 02:54:02 PM »

cool thanks

Quote from: Luckie Stiff on February 01, 2010, 02:50:53 PM

Shit if you've got it this far down, capping it would only be another step towards your end goal, I say go for it. As for primer, I really like PPG high fill primer, you'll need to thin it down quite a bit, but it is a great fill primer. I've done 3 cars and chassis with it. Good shit and it's priced right.

« **Reply #84 on:** February 01, 2010, 06:12:43 PM »

just sprayed mine today with 2K urethane primer from Kustom House.I got it and all my other paint from TCP Global in SanDiego.If the base clear sprays as nice as the primer did I will be very happy not expensive and sprays real nice

« **Reply #85 on:** February 01, 2010, 06:29:01 PM »

cant wait to see it gordy

« **Reply #86 on:** February 01, 2010, 11:00:06 PM »

Quote from: farmergord on February 01, 2010, 06:12:43 PM

just sprayed mine today with 2K urethane primer from Kustom House.I got it and all my other paint from TCP Global in SanDiego.If the base clear sprays as nice as the primer did I will be very happy not expensive and sprays real nice

I Used the same for my boat. Although it was my 1st total paint job, everything went on well except the clear. I had a hard time with runs. If I do another I will use a different clear

« **Reply #87 on:** February 02, 2010, 06:00:51 PM »

thanks for the info

« **Reply #88 on:** February 17, 2010, 05:41:15 PM »

well working on post count

spent my day off picking up and paying for stuff for the boat got a peice of alum for fab on transom cover nice big chunk 12.00$ cam & lifters 224.00$ ppg filler primer gal 60.00$ started to tear down my motor removed very clean heads found why it had a miss #8 cyclinder was sucking water by way of the intake found rust in the cyclinder figure going to have block cleaned up and see if it can be honed pistons rods and crank all look new mondello wants 399.00 for sized crank and rod bearings thats crazy nothing is cheap trough them ill just keep looking I have two motors coming in two weeks with K heads and poss W30 heads when i go down to torrance for school

« **Reply #89 on:** February 17, 2010, 08:05:58 PM »

Quote from: honda1 on February 17, 2010, 05:41:15 PM

Well working on my post count
Spent my day off picking up and paying for stuff for the boat. I got a piece of alum for fab on transom cover, a nice big chunk for 12.00$, cam & lifters 224.00$, ppg filler primer gal 60.00$. Then I started to tear down my motor, removed very clean heads and found why it had a miss, the #8 cylinder was sucking water by way of the intake and I found rust in the cylinder.

I figure I'm going to have the block cleaned up and see if it can be honed, the pistons rods and crank all look new, Mondello wants $399.00 for sized crank and rod bearings, that's crazy! nothing is cheap through them, I'll just keep looking. I have two motors coming in two weeks with K heads and poss W30 heads when I go down to Torrance for school.

Fixed it for ya!

Just bustin' your balls...

Make the posts count!...LOL

You make me work too hard to read your chit..

GT

« **Reply #90 on:** February 17, 2010, 08:18:02 PM »

Sorry GT Ive been known to get the blood flowing on this site

Quote from: GT Jets on February 17, 2010, 08:05:58 PM

Fixed it for ya! Just bustin' your balls... Make the posts count!...LOL

You make me work too hard to read your chit..

GT

« **Reply #91 on:** February 17, 2010, 10:09:54 PM »

Quote from: honda1 on February 17, 2010, 08:18:02 PM

Sorry GT Ive been known to get the blood flowing on this site

It's all good brotha, I am a trained expert when it comes to ignoring people

GT

« **Reply #92 on:** March 10, 2010, 07:10:13 PM »

Well little update Ive got the color off down to gell have my primer going to shoot it and block it next week then its going to torrance and a buddy is taking it to havasu and paint it . For free He bought out a ppg warehouse and has tons of colors and a booth I just need to get it preped . hes got a 455 motor and a tunnel and carbs for me to .Picking up all the parts sunday in torrance my aunt passed so will be at funeral on sat .

« **Reply #93 on:** March 10, 2010, 10:42:14 PM »

Sorry for your loss Harry. Seems most of us can relate recently.

Good progress on that thing tho bro!

Kickin some ass and not even bothering to take names!

Hope we see you Fathers Day at Big River with it!

Ray

« **Reply #94 on:** March 11, 2010, 05:30:57 AM »

Thank you Ray

« **Reply #95 on:** March 14, 2010, 06:54:30 PM »

scored some free stuff from a friend for my motor in LA this week end

« **Reply #96 on:** March 14, 2010, 07:56:56 PM »

good score

« **Reply #97 on:** March 17, 2010, 10:15:51 AM »

Quote from: Ralph Brunt on March 14, 2010, 07:56:56 PM

good score

X2! Looks like a LOT of good chit in there! I love those treasure hunts!
Got plans for that Unilite?

Ray

« **Reply #98 on:** March 17, 2010, 02:31:21 PM »

geez i hate being wrong all the time! looks like you can give olds stuff away

just kidding harry good score good score!

« **Reply #99 on:** March 24, 2010, 12:50:43 PM »

Hey Nordie you can give Olds parts away but you cant give that hair cut away lol Ray i have a couple of those dizzy why you ask

let me know

honda1

farmergord

honda1

farmergord

honda1

honda1

honda1

Luckie Stiff

honda1

farmergord

honda1

The Chaz

honda1

honda1

GT Jets

honda1

GT Jets

honda1

IRRebel

honda1

honda1

Ralph Brunt

IRRebel

Nordie

honda1