SoCal Jet Boats
Tech Talk => Projects => Topic started by: Brad @ SCJB on September 05, 2014, 01:37:31 PM
-
Been plugging away at this and dusting off my old AutoCAD skills.... Thought I'd start a thread to show what I'm up to and the progress as it comes along. Here are some of the transom blocks I designed.
-
Nice work brad! Those look killer!!!
Sent from my iPhone using SoCalJetBoats mobile app
-
What did you end up with for your front engine plate?
Sent from my SCH-I535 using SoCal Jet Boats mobile app
-
What did you end up with for your front engine plate?
Sent from my SCH-I535 using SoCal Jet Boats mobile app
One idea I have...not sold on it just yet.
-
Cool! Good to see you making progress.
Sent from my SCH-I535 using SoCal Jet Boats mobile app
-
I need a set...let me know
Sent from my SPH-L720 using SoCal Jet Boats mobile app
-
Would you be incorporating the spacers in the mounts? I realize it couldn't be done on a water jet and would need to be a billet piece then.
Sent from my SPH-L720 using SoCal Jet Boats mobile app
-
I am about ready to cut some aluminum.
Who has a CNC or water jet and a mill?
Lets make some chips.
-
I am about ready to cut some aluminum.
Who has a CNC or water jet and a mill?
Lets make some chips.
if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff
Sent from my dirty butthole
-
I am about ready to cut some aluminum.
Who has a CNC or water jet and a mill?
Lets make some chips.
if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff
Sent from my dirty butthole
-
finished designing the blocks that will mount the plates to the transom. Added stringer washers for substance.
-
scratch the ones i just posted above. the space for the concept I was trying to achieve was a bit cramped. This is the design I will probably be going with...
-
scratch the ones i just posted above. the space for the concept I was trying to achieve was a bit cramped. This is the design I will probably be going with...
Looks good Buddy
Sent from my SAMSUNG-SGH-I747 using SoCal Jet Boats mobile app
-
if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff
Gotta take my class ;)
-
Gotta take my class ;)
nah I'm old school lol new toy just need to w ire up the rotofase and ready for action
Sent from my dirty butthole
-
Let's make that happen, I can pick up that manifold.
Sent from my SCH-I535 using SoCal Jet Boats mobile app
-
Flusher,
I'm shopping this out locally. How much is a reasonable price to have these done? The two plate blocks and 6 of the blocks that hold the cav bar. Would you even be interested in doing this job?
-
Let's make that happen, I can pick up that manifold.
Sent from my SCH-I535 using SoCal Jet Boats mobile app
we can hook up soon bud mani is collecting dust with all my other boat parts
Sent from my dirty butthole
-
Damn thread jackers. Third time its happened to this thread. Lol....go start your own!
-
Flusher,
I'm shopping this out locally. How much is a reasonable price to have these done? The two plate blocks and 6 of the blocks that hold the cav bar. Would you even be interested in doing this job?
depends on what type of machines they run bud if they have late model programmable stuff might be cheaper if it manual it's gonna take some time to set up the machine and a jog to make it happen. Lots if good machinist do this stuff in the side thru the company's they work for in there time.
Sent from my dirty butthole
-
I will ask my buddy that runs a big machine shop a round about price for a set with your disc and get back to ya
Sent from my dirty butthole
-
Sorry brotherman
Sent from my SCH-I535 using SoCal Jet Boats mobile app
-
Sorry brotherman
Sent from my SCH-I535 using SoCal Jet Boats mobile app
being your the pro machinest you can shed some lite to joe back to the topic :)
Sent from my dirty butthole
-
What are you gonna use for bushings in your pillow blocks....
-beerjet-
-
What are you gonna use for bushings in your pillow blocks....
-beerjet-
Those Kevlar ones that you press in
-
Those Kevlar ones that you press in
Never seen those.
-beerjet-
-
Same thing in the block you gave me.
-
Those Kevlar ones that you press in
Could you share some info on those please?
-
You can try pat lbz on the boards too I know he machined a nice billet bracket to replace the Bennet plastic one
Sent from my dirty butthole
-
These are the bushings I was talking about. Not 100% sure if this is the best option, so if there's something else I should use, let me know.
-
I've only ever seen the Delron or bronze bushings recommended.
-beerjet-
-
B rad call me Monday and I will get the plates made and look at the truck.
Sent from my iPhone using SoCalJetBoats mobile app
-
I am about ready to cut some aluminum.
Who has a CNC or water jet and a mill?
Lets make some chips.
Brad I have the Omax drawing program on my PC and a waterjet here in the hood. Ive made gears for RC cars on that thing.
-
Brad I have the Omax drawing program on my PC and a waterjet here in the hood. Ive made gears for RC cars on that thing.
Look what the cat drug in.....how ya been bud?
-
I'm good Bro, How are folks on that side of the hood? Ya know I'm just down here by Racetrack and Warm Springs.
-
Brad I have the Omax drawing program on my PC and a waterjet here in the hood. Ive made gears for RC cars on that thing.
and here's b rads sign 😜
Sent from my dirty butthole