Crazy Eight cav plates

« **on:** September 05, 2014, 01:37:31 PM »

Been plugging away at this and dusting off my old AutoCAD skills.... Thought I'd start a thread to show what I'm up to and the progress as it comes along. Here are some of the transom blocks I designed.

« **Reply #1 on:** September 05, 2014, 02:34:46 PM »

Nice work brad! Those look killer!!!

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #2 on:** September 05, 2014, 03:19:43 PM »

What did you end up with for your front engine plate?

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #3 on:** September 05, 2014, 03:22:59 PM »

Quote from: Flusher on September 05, 2014, 03:19:43 PM

What did you end up with for your front engine plate?

Sent from my SCH-I535 using SoCal Jet Boats mobile app

One idea I have...not sold on it just yet.

« **Reply #4 on:** September 05, 2014, 03:25:36 PM »

Cool! Good to see you making progress.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #5 on:** September 05, 2014, 03:29:30 PM »

I need a set...let me know

Sent from my SPH-L720 using SoCal Jet Boats mobile app

« **Reply #6 on:** September 05, 2014, 08:08:53 PM »

Would you be incorporating the spacers in the mounts? I realize it couldn't be done on a water jet and would need to be a billet piece then.

Sent from my SPH-L720 using SoCal Jet Boats mobile app

« **Reply #7 on:** September 11, 2014, 06:05:36 PM »

I am about ready to cut some aluminum.

Who has a CNC or water jet and a mill?

Lets make some chips.

« **Reply #8 on:** September 11, 2014, 09:46:44 PM »

Quote from: Brad @ SCJB on September 11, 2014, 06:05:36 PM

I am about ready to cut some aluminum.

Who has a CNC or water jet and a mill?

Lets make some chips.

if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff

Sent from my dirty butthole

« **Reply #9 on:** September 11, 2014, 09:47:15 PM »

Quote from: Brad @ SCJB on September 11, 2014, 06:05:36 PM

I am about ready to cut some aluminum.

Who has a CNC or water jet and a mill?

Lets make some chips.

if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff

Sent from my dirty butthole

« **Reply #10 on:** September 12, 2014, 01:34:35 PM »

finished designing the blocks that will mount the plates to the transom. Added stringer washers for substance.

« **Reply #11 on:** September 12, 2014, 02:47:04 PM »

scratch the ones i just posted above. the space for the concept I was trying to achieve was a bit cramped. This is the design I will probably be going with...

« **Reply #12 on:** September 12, 2014, 02:53:15 PM »

Quote from: Brad @ SCJB on September 12, 2014, 02:47:04 PM

scratch the ones i just posted above. the space for the concept I was trying to achieve was a bit cramped. This is the design I will probably be going with...

Looks good Buddy

Sent from my SAMSUNG-SGH-I747 using SoCal Jet Boats mobile app

« **Reply #13 on:** September 12, 2014, 07:55:42 PM »

Quote from: Just Electric on September 11, 2014, 09:46:44 PM

if you were closer or could ship the parts and auto cad disc I'm sure flusher on the boards can figure something out. I've seen his work at b1 that he does and it's too notch bad mofo stuff

Gotta take my class

« **Reply #14 on:** September 12, 2014, 08:50:44 PM »

Quote from: Flusher on September 12, 2014, 07:55:42 PM

Gotta take my class

nah I'm old school lol new toy just need to w ire up the rotofase and ready for action

Sent from my dirty butthole

« **Reply #15 on:** September 12, 2014, 09:27:01 PM »

Let's make that happen, I can pick up that manifold.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #16 on:** September 12, 2014, 09:36:06 PM »

Flusher,

I'm shopping this out locally. How much is a reasonable price to have these done? The two plate blocks and 6 of the blocks that hold the cav bar. Would you even be interested in doing this job?

« **Reply #17 on:** September 12, 2014, 09:37:28 PM »

Quote from: Flusher on September 12, 2014, 09:27:01 PM

Let's make that happen, I can pick up that manifold.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

we can hook up soon bud mani is collecting dust with all my other boat parts

Sent from my dirty butthole

« **Reply #18 on:** September 12, 2014, 09:38:57 PM »

Damn thread jackers. Third time its happened to this thread. Lol....go start your own!

« **Reply #19 on:** September 12, 2014, 09:46:59 PM »

Quote from: Brad @ SCJB on September 12, 2014, 09:36:06 PM

Flusher,

I'm shopping this out locally. How much is a reasonable price to have these done? The two plate blocks and 6 of the blocks that hold the cav bar. Would you even be interested in doing this job?

depends on what type of machines they run bud if they have late model programmable stuff might be cheaper if it manual it's gonna take some time to set up the machine and a jog to make it happen. Lots if good machinist do this stuff in the side thru the company's they work for in there time.

Sent from my dirty butthole

« **Reply #20 on:** September 12, 2014, 09:48:52 PM »

I will ask my buddy that runs a big machine shop a round about price for a set with your disc and get back to ya

Sent from my dirty butthole

« **Reply #21 on:** September 12, 2014, 10:00:01 PM »

Sorry brotherman

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #22 on:** September 12, 2014, 10:08:42 PM »

Quote from: Flusher on September 12, 2014, 10:00:01 PM

Sorry brotherman

Sent from my SCH-I535 using SoCal Jet Boats mobile app

being your the pro machinest you can shed some lite to joe back to the topic

Sent from my dirty butthole

« **Reply #23 on:** September 12, 2014, 11:05:49 PM »

What are you gonna use for bushings in your pillow blocks....

-beerjet-

« **Reply #24 on:** September 12, 2014, 11:10:02 PM »

Quote from: beerjet on September 12, 2014, 11:05:49 PM

What are you gonna use for bushings in your pillow blocks....

-beerjet-

Those Kevlar ones that you press in

Brad @ SCJB

jyeager

Flusher

Brad @ SCJB

Flusher

Ralph Brunt

Ralph Brunt

Brad @ SCJB

Just Electric

Just Electric

Brad @ SCJB

Brad @ SCJB

Beaveretriever

Flusher

Just Electric

Flusher

Brad @ SCJB

Just Electric

Brad @ SCJB

Just Electric

Just Electric

Flusher

Just Electric

beerjet

Brad @ SCJB