Bolt on shoe/plate jc/jg

« **on:** November 07, 2016, 08:10:39 AM »

Used bolt on shoe an plate with all hardware included as well added 90* side rails. This will work for a standard berk intake an will bolt to either a C or Split bowl. No machining or removal of intake to mount this. The biting edge will be about at keel. All you need to mount this will be some drill bits, allen wrench, epoxy (to smooth out shoe to intake), taps, measuring devise an sander (if you need to sand/trim in-between intake/transom to accommodate the plate angle). The cradle has long bolts to adjust the plate angle but you could ad shims/block of aluminum as needed if you prefer. An easy way to get a ride plate without the costly expense of removing your intake. If for some reason you dont like the cradle hole location on plate for your set up, have them welded up an re-drill. I don't suggest this part for a serious build/racer... If you have a mild to medium river boat an looking to pick up a few miles/performance or assist in handling issues...its a great option. I have this on my 18' spectra an helped throughout performance especially wot. $220. shipped Lower 48