Are you going to big bend this weekend ? I know someone who needs that


Sent from the back seat of my Daytona in the garage

Is this for a jacuzzi wj?


Sent from SoCal Jet Boats

No. Berkley


Sent from McIntyre park

does it matter how much hp?

Looks like it's got some blocker in it too.

Not really a blocker.  That piece between the uprights, after the pad, follows the contour of the intake roof.  Its primary purpose is to prevent the uprights from cracking.  Cracks will form in the uprights, immediately behind the pad.  From what I understand, once that piece was implemented, issues with cracking were almost entirely eliminated.

The pad and uprights on this loader should also be chromoly.

does it matter how much hp?

No!  The purpose of the loader is to keep the impeller loaded with a sufficient supply of water.  The HP, the RPM at which peak HP is produced, the angle cut of the impeller, and the impeller diameter are really what matters when it comes to gaining/losing RPM.

I believe the other loader with the shorter ramps would work for you. What works for one boat may not work for another its Test Test Test . If you go to Big Ben this weekend you can try it.  Its strong and safe you don't wont your loader coming apart at high speeds that can be SCARY. Its happened to Me

The long loader Right. TOWTURK69 is going to take the shorter one.
And as mounting. I went one size larger thru bolt GRADE 8 bolt with lock nut.

short loader