stuff for sale

« **on:** December 06, 2008, 05:15:37 PM »

all prices plus shipping and obo

bbf ski tow 20.00

jacuzzi yj rudder 10.00sold

stringer mount throttle and cable 50.00sold

floor mount diverter handle 100.00 missing 2 cover screws

oil cooler 90.00 i would have it flushed outsold

diverter 300.00

plug wire loom 30.00 no boltssold

chevy heads, free you pick upgone crewcheif

intake, i dont know who made it, fits berk, you will need to drill out and re-tap loader holes. 200.00 has shoe, no ride platesold

rock grate 10.00sold

bbf valve covers, need polish 100.00

scoop, not for dominator 70.00 sold

« **Reply #1 on:** December 06, 2008, 05:55:13 PM »

Damn, I need that cooler! NO $$$ right now. Flush the water side or the oil side?

« **Reply #2 on:** December 06, 2008, 05:57:03 PM »

Quote from: HDriderTH on December 06, 2008, 05:55:13 PM

Damn, I need that cooler! NO $$$ right now. Flush the water side or the oil side?

both, the oil side has been disconnected for about a year, but i still ran the water. it was in the boat when it sank

« **Reply #3 on:** December 06, 2008, 06:34:42 PM »

Quote from: Ralph Brunt on December 06, 2008, 05:57:03 PM

both, the oil side has been disconnected for about a year, but i still ran the water. it was in the boat when it sank

I've got some Bassett header supports maybe I can unload, I'll let you know.

« **Reply #4 on:** December 06, 2008, 06:43:12 PM »

Stupid question but how does the oil cooler install and would it be a good investment for my boat

Thanks

« **Reply #5 on:** December 06, 2008, 06:54:01 PM »

Quote from: 468Bahner on December 06, 2008, 06:43:12 PM

Stupid question but how does the oil cooler install and would it be a good investment for my boat

Thanks

water goes where the straight nipples are and oil through the 90's i dont know what it takes to run it on a cheby

i ran a remote oil filter and put the flow so it went through the cooler then the filter, that way there was always filtered oil going in the motor. good ivestment? i dont know

« **Reply #6 on:** December 06, 2008, 07:36:21 PM »

what is the difference between a YJ and WJ ? i have a jacuzzi pump but im not sure which one i have. i sure would like that rudder. also is the diverter for a jacuzzi or berk?

Thanks

The Beav

« **Reply #7 on:** December 06, 2008, 07:49:52 PM »

The wj should four bolts pattern right be hide the bowl ,hope this helps

« **Reply #8 on:** December 06, 2008, 07:55:04 PM »

thanks boost. it looks as if i have a WJ, by the way whos pump is that? i want that diverter.

SORRY TO THREAD JACK

The Beav

« **Reply #9 on:** December 06, 2008, 10:27:45 PM »

Quote from: Beaveretriever on December 06, 2008, 07:55:04 PM

thanks boost. it looks as if i have a WJ, by the way whos pump is that? i want that diverter.

SORRY TO THREAD JACK

The Beav

i dont think the diverters themselves are different, its the part that bolts to the bowl thats different.
when i had my w/j i got the nozzle adapter (the part that bolts to the bowl) from tom at jet boat performance.

« **Reply #10 on:** December 06, 2008, 10:30:45 PM »

I like those valve covers Ralph hmmmmmm

« **Reply #11 on:** December 07, 2008, 10:04:59 AM »

Ralph, can you get me the casting numbers off the SBC heads?

I might be interested.

« **Reply #12 on:** December 07, 2008, 11:34:35 AM »

Quote from: crewchief22 on December 07, 2008, 10:04:59 AM

Ralph, can you get me the casting numbers off the SBC heads?

I might be interested.

« **Reply #13 on:** December 07, 2008, 11:36:41 AM »

What did we ever do without the digi camera?, that's just cool...

« **Reply #14 on:** December 07, 2008, 11:39:57 AM »

Quote from: GT Jets on December 07, 2008, 11:36:41 AM

What did we ever do without the digi camera?, that's just cool...

we used a telephone (aka land line) and drove around a lot

remember those days $:-\$

« **Reply #15 on:** December 07, 2008, 08:00:31 PM »

Hey Ralph other than needing polishing is that all the valve covers need

« **Reply #16 on:** December 07, 2008, 08:05:42 PM »

« **Reply #17 on:** December 07, 2008, 08:11:03 PM »

Quote from: 76NORDIC on December 07, 2008, 08:00:31 PM

Hey Ralph other than needing polishing is that all the valve covers need

If you look closely it looks like they need some breathers. lol

« **Reply #18 on:** December 07, 2008, 08:48:56 PM »

ya you be right

« **Reply #19 on:** December 08, 2008, 04:51:43 AM »

Quote from: 76NORDIC on December 07, 2008, 08:00:31 PM

Hey Ralph other than needing polishing is that all the valve covers need

they are both missing one screw from the baffles i ran them like that on my race boat and had no problems. i think i have some breathers laying around i can throw in

« **Reply #20 on:** December 09, 2008, 05:50:46 AM »

ttt before it goes to performance boat

« **Reply #21 on:** December 09, 2008, 09:15:22 AM »

Is'nt the long beach swapmeet this weekend?

« **Reply #22 on:** December 09, 2008, 12:26:58 PM »

nope long beach was the weekend before last.. and pomona was this past weekend

« **Reply #23 on:** December 09, 2008, 01:33:01 PM »

those valve covers are purdy......

....ill ask santa!!...cause im broke!!

i believe lb swap is the 14th again..some times they do two in a month

« **Reply #24 on:** December 09, 2008, 01:37:12 PM »

Ralph, check your pm's

Ralph Brunt

HDriderTH

Ralph Brunt

HDriderTH

2savage4you

Ralph Brunt

Beaveretriever

BOOST

Beaveretriever

Ralph Brunt

76NORDIC

crewchief22

Ralph Brunt

GT Jets

Ralph Brunt

76NORDIC

76NORDIC

BOOST

76NORDIC

Ralph Brunt

Ralph Brunt

Marcsrollin

19ftCheyenne

CHROMEY

crewchief22