I have done one bottle pass on a 1000' coarse and my hardware was way to aggressive  the boat wanted to crash three times on the pass but I never lifted. Now that I have the hardware dialed it will be nice to see what a bottle pass does. I have only sprayed my boat 3 times since the new motor. once down the track and a couple short burstd on the river. im gonna leg a few out fathers day and see what it will do. im usually slowing it down on the track with anywhere from 4-4.5 seconds of a 500 rpm stutter in a 1000' and 2-2.5 seconds in the 1320. haven't ran all motor down the track except in TNT and it ran a 9.47 in 1320 all motor. I will say if you want to get the hardware straightened out, the track is where to do it. I FOUND OUT MORE ABOUT TUNING HARDWARE ON MY BOAT IN ONE DAY AT THE TRACK THEN 4 YEARS ON THE RIVER.

Still have a long way to go with the setup. It's getting there. Had to put the bottle on it to get the little small block where it wants to be rpm wise. Made a couple passes a few weeks ago. The nose is a bit high, need to play with the nozzle a bit.


Sent from my iPhone using SoCal Jet Boats

That hell fire vs Blender  that'll be a sight to see!!!

Here is what I'll bring for you. Should leave off the line pretty good. Light layup rounded keel.

who is this carrico you speak of and what's he got? Blender🐢


Sent from my iPhone using SoCal Jet Boats

IG account riverracer262


"RTCP"

That hell fire vs Blender  that'll be a sight to see!!!

I really wanna see Blender vs Jimpen that would be some good watchin.


"RTCP"