SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: More2LifeThanMPG on November 08, 2014, 05:04:01 PM
-
So I was at the OC swap meet a couple weeks ago and they have a "vintage" section, well there was a really sweet looking old wagon. So I picked it up thinking I would just wipe it down and clear coat it. Well since then I have had a new idea, custom lifted wagon! Something like such below. I know I'm not the first one on here to want to do this, and I am not a very mechanical person. So I've done a little research on different ways to complete this project. But I would enjoy some input and pictures of ones everyone else has built.
What I'm thinking so far is some old atv rims and tires (not sure on size yet), mounted on some kind of axle with bearings, bend up some lift piping along with an ice chest rack in the rear, cup holders on the sides, May or may not do the suspension (mostly due to cost), possibly widen the wagon tray (my daughter is 7). Over all goal is beach and swap meet cruiser.
Sent from my iPad using SoCal Jet Boats
-
Damn! Been looking for an OC swap meet buddy! Wagons are sweet! I wanna get one for my wife lol
Sent with my Fingers
-
I'm more of a low wagon guy myself, that way she can climb in and out by herself. just be careful, I went through a phase and bought every radio flyer steel pan wagon i Gould find on cl . I think I still have about 6 of them in my storage unit after building one for almost everyone in my family. I even built a huge 4 person wagon on bags and used electric wheel chair motors so pulling it was easy. Ended up selling that one at Pomona sometime last year and now I'm working on a deep pan atw radio flyer wagon. Getting a full c Chanel frame, solid front axle and a cantilever bag set up using semi truck cab bags. I have a problem.
Sent from my iPhone using SoCalJetBoats
-
Damn! Been looking for an OC swap meet buddy! Wagons are sweet! I wanna get one for my wife lol
Sent with my Fingers
-
I'm more of a low wagon guy myself, that way she can climb in and out by herself. just be careful, I went through a phase and bought every radio flyer steel pan wagon i Gould find on cl . I think I still have about 6 of them in my storage unit after building one for almost everyone in my family. I even built a huge 4 person wagon on bags and used electric wheel chair motors so pulling it was easy. Ended up selling that one at Pomona sometime last year and now I'm working on a deep pan atw radio flyer wagon. Getting a full c Chanel frame, solid front axle and a cantilever bag set up using semi truck cab bags. I have a problem.
Sent from my iPhone using SoCalJetBoats
Badass dude!!!!!
Sent with my Fingers
-
So I was at the OC swap meet a couple weeks ago and they have a "vintage" section, well there was a really sweet looking old wagon. So I picked it up thinking I would just wipe it down and clear coat it. Well since then I have had a new idea, custom lifted wagon! Something like such below. I know I'm not the first one on here to want to do this, and I am not a very mechanical person. So I've done a little research on different ways to complete this project. But I would enjoy some input and pictures of ones everyone else has built.
What I'm thinking so far is some old atv rims and tires (not sure on size yet), mounted on some kind of axle with bearings, bend up some lift piping along with an ice chest rack in the rear, cup holders on the sides, May or may not do the suspension (mostly due to cost), possibly widen the wagon tray (my daughter is 7). Over all goal is beach and swap meet cruiser.
Sent from my iPad using SoCal Jet Boats
ive got a shop with a tool or two. when your ready, i can help ya out.
-
Damn! Been looking for an OC swap meet buddy! Wagons are sweet! I wanna get one for my wife lol
Sent with my Fingers
I'll be there tomorrow. Probably around 10ish.
Sent from my iPhone using SoCalJetBoats
-
ive got a shop with a tool or two. when your ready, i can help ya out.
No way! Sweet deal! What do you do and where's shop at? I have yet to actually speak with anyone that have built a lifted wagon.
Sent from my iPhone using SoCalJetBoats
-
I'm more of a low wagon guy myself, that way she can climb in and out by herself. just be careful, I went through a phase and bought every radio flyer steel pan wagon i Gould find on cl . I think I still have about 6 of them in my storage unit after building one for almost everyone in my family. I even built a huge 4 person wagon on bags and used electric wheel chair motors so pulling it was easy. Ended up selling that one at Pomona sometime last year and now I'm working on a deep pan atw radio flyer wagon. Getting a full c Chanel frame, solid front axle and a cantilever bag set up using semi truck cab bags. I have a problem.
Sent from my iPhone using SoCalJetBoats
Yes sir, you do! Just remind the wife and everyone else there are many far worse problems that you could have! Haha
Sent from my iPhone using SoCalJetBoats
-
more 2 life.....pm sent
-
more 2 life.....pm sent
Ha, just replied.
Sent from my iPhone using SoCalJetBoats
-
theres a guy at the long beach swapmeet that does all carts. i think hes from wicked carts. raised, lowered, custom billet hubs, etc...
-
theres a guy at the long beach swapmeet that does all carts. i think hes from wicked carts. raised, lowered, custom billet hubs, etc...
Sounds expensive, but I'll have to look into that for reference. Thank you
Sent from my iPhone using SoCalJetBoats
-
Sounds expensive, but I'll have to look into that for reference. Thank you
Sent from my iPhone using SoCalJetBoats
yeah i was looking into making a wagon. i could weld up the frame no problem... but all the little pieces like the shocks, etc are 12 here, 15 there... heim joints for steering, etc... at some point it might just be cheaper in the long run to buy a cart already made for a few hundred bucks. the cart wheels alone are like $100 for a set, even on ebay. let alone a set of tires for them.
-
yeah i was looking into making a wagon. i could weld up the frame no problem... but all the little pieces like the shocks, etc are 12 here, 15 there... heim joints for steering, etc... at some point it might just be cheaper in the long run to buy a cart already made for a few hundred bucks. the cart wheels alone are like $100 for a set, even on ebay. let alone a set of tires for them.
That's the plan, purchase and good looking pan and stock hardware, modify it with a lift and some old used atv tires at someone is trying to just get rid of. KISS...
Sent from my iPhone using SoCalJetBoats
-
So I was doing some more research and am having a hard time finding a wheel combo the size I'm thinking. All the atv rims are like 12 inch with tires in the 20 inch plus. Or go cart rims are like 6 inches with 8 inch tires. I was thinking more of like a 12-15 inch total height.
Even more so I am have a hard time finding hubs or make much other than go cart rims connect to the wagon axle.
Anyone have any pictures or information on this stuff?
Sent from my iPad using SoCal Jet Boats
-
what style of tire were you thinking? mudder, all-terrain, turf friendly....like whats on lots of ride on mowers or what you usually find on golf carts?
also, style of wheel? on amazon, you can get complete wheel for golf cart, stock looking for around 31$/ea. may not be best price, but i didnt hunt for too long tho.
-
try looking for an 80cc quad. as long as it has the wheels....
-
12-15"? pretty big. try looking into golf cart rims. only problem is the hubs are gonna be custom and expensive... not little 3 bolt go-kart wheels. and they're gonna be heavy.
-
If you care for a set of steel golf cart wheels, let me know. I've got a whole stack with tires
Sent from my SAMSUNG-SM-G870A using SoCal Jet Boats mobile app
-
12-15"? pretty big. try looking into golf cart rims. only problem is the hubs are gonna be custom and expensive... not little 3 bolt go-kart wheels. and they're gonna be heavy.
Yeah I was originally thinking atv wheels, because I know a couple off road shops that just have tons of used ones. But the more I look the more I realize it won't be easy or cheap to get them to connect onto the wagon.
Sent from my iPad using SoCal Jet Boats
-
what style of tire were you thinking? mudder, all-terrain, turf friendly....like whats on lots of ride on mowers or what you usually find on golf carts?
also, style of wheel? on amazon, you can get complete wheel for golf cart, stock looking for around 31$/ea. may not be best price, but i didnt hunt for too long tho.
Really anything that looks likes similar to a lifted truck tire, so not go cart slicks. Haha
I have a couple places I know that I can get some old used (but still still hold air) off road tires from. I am really just wanting it to be functionally cheap. I don't want to have to go buy a bunch of stuff to make my idea work. Looks like I will just have to change my idea to make it work.
Sent from my iPad using SoCal Jet Boats
-
Really anything that looks likes similar to a lifted truck tire, so not go cart slicks. Haha
I have a couple places I know that I can get some old used (but still still hold air) off road tires from. I am really just wanting it to be functionally cheap. I don't want to have to go buy a bunch of stuff to make my idea work. Looks like I will just have to change my idea to make it work.
Sent from my iPad using SoCal Jet Boats
tons of wheel options around that look like 4x4 truck wheels. only thing is....they dont bolt up like real wheels do. example: wheelbarrow wheels. its a thru bolt to keep wheel on. or hand dolly wheels. some of these have knobbys on them. harbor freight has some air filled tires with some knobbys on them. and CHEAP. so if youre good with that type mount, options are good for you.
-
here, check this out. see how the wheels are mounted. i dont know who owns this....but looks like dolly wheels or harbor freight specials. shocks look like those off a mountain bike. which would be too stiff, unless youre only after the look.
youre still in this game....
-
here, check this out. see how the wheels are mounted. i dont know who owns this....but looks like dolly wheels or harbor freight specials. shocks look like those off a mountain bike. which would be too stiff, unless youre only after the look.
youre still in this game....
Those almost look to be wheel barrow tires/wheels. basically a spindle mount
Sent from my SAMSUNG-SM-G870A using SoCal Jet Boats mobile app
-
Right....that's my point. If this mount is good for you.....which when I've looked up wagons.... it's a popular mount....then finding a wheel is easier.
-
Right....that's my point. If this mount is good for you.....which when I've looked up wagons.... it's a popular mount....then finding a wheel is easier.
See to me those wheels look like a bunch of every hardware to get to mount up... But I have to admit I am completely out of my element here... I actually found out there is a guy at dependable off-road in Anaheim that has built a couple wagons (truck is being dropped off tomorrow so I will attempt to pick his brain for information.
Also they sell shocks and mini coil overs just for wagons, it's most for the lifted look. Few look right in the set up though.
Sent from my iPad using SoCal Jet Boats
-
well, its your project bud. have fun with it however you see fit :thumbup:
-
well, its your project bud. have fun with it however you see fit :thumbup:
This is true... I need to get something infront of me and start working. Haha
Sent from my iPad using SoCal Jet Boats
-
So I finally pieced something together... A bobby bilt suspension with enlarged wheels and the largest pan radio flyer offers. I'm very happy with it and most importantly the little lady loves it.
Now to add some cup holders, and somewhere down the road an ice chest rack on the rear!
Sent from my iPhone using SoCalJetBoats
-
Thats awesome. Any way we can get pics of that try suspension and tires?
-
Thats awesome. Any way we can get pics of that try suspension and tires?
Yeah I'll get some close ups this weekend, it will mostly likely be at the OC swap meet on Sunday also.
Sent from my iPhone using SoCalJetBoats
-
Been a long busy week...
Sent from my iPhone using SoCalJetBoats
-
This thread started me tinking about my old swapmeet wagon. Drug it out of the shed today, boy it need some love.
-
Yeah...made me think of building one for my son.