Place Diverter

« **on:** June 17, 2016, 11:36:45 AM »

I need to replace my fittings and lines....plastic tubing.....

Question is bleeding/air in system....the change out is a no brainer...need advice on fluid/air bleed if at all......1990 system...never been touched...

« **Reply #1 on:** June 17, 2016, 11:54:39 AM »

I use ATF just work it air will purge out. All I do. Right or Wrong? But works

Sent from my iPhone using SoCal Jet Boats

« **Reply #2 on:** June 17, 2016, 11:58:09 AM »

Good point...did not even consider the fluid type....

Still, main question...is an air/to fluid bleed needed?

« **Reply #3 on:** June 17, 2016, 11:59:34 AM »

Control unit buried deep... gona pull "backyard" first....and look at it....

« **Reply #4 on:** June 17, 2016, 02:29:33 PM »

Shouldn't I just reinstalled mine n I just worked up n down a lil bit. It's fine

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** June 17, 2016, 08:09:56 PM »

Thanks for the feedback!! Sure will be easy to test!!

laveyjoel

Place Diverter

88 Baker

Re: Place Diverter

laveyjoel

Re: Place Diverter

laveyjoel

Re: Place Diverter

88 Baker

Re: Place Diverter

laveyjoel

Re: Place Diverter