Has any of you Vegas folks, heard of John Keller and J&S machine shop, or John Keller racing engines?
 I visited their shop today, to look at a crank, and check out their shop to possibly do work on my block.
They look like a respectable shop, just have never heard of them before.

Hal, i don't know as i don't live there but, my suggestion to you is to take you dial bore gauge with you and ask to see a block they just machined, then ask to measure it yourself. If they balk then i suggest you walk away with your money, if not then measure the mains and see how close they came.

finding a good machinest (sp?) is a pain in the ass because most people just take their word for it that it is done right... but, often not the case when you get it home and start checking their work...
hope this helps and good luck
ralph

Hal, i don't know as i don't live there but, my suggestion to you is to take you dial bore gauge with you and ask to see a block they just machined, then ask to measure it yourself. If they balk then i suggest you walk away with your money, if not then measure the mains and see how close they came.

finding a good machinest (sp?) is a pain in the ass because most people just take their word for it that it is done right... but, often not the case when you get it home and start checking their work...
hope this helps and good luck
ralph

 Ralf, you f@#$%!&ing kidding! Finding a good machine shop is a pain in the ass! It seems especially so , here in Vegas.

Theirs a place on valley view and spring mtn behind channel 13 news station. Very good place for me since I live in vegas. Also theirs a place in henderson on american pacific and Gibson that does great work too if needed pm me and I can find out info.


Sent from my iPhone using SoCalJetBoats mobile app