There might already be holes that were drilled before. Prolly filled in with the paint job tho. You can try to feel under deck where the holes are, and may get lucky. You are looking for most likely six holes on each side, 2 forward, 2 middle, and 2 aft. If not that lucky then you will need a couple of helpers to hold up the bimini and open it up, and mark and drill the holes. Not hard really

You are not too far from me either   LMK how it goes

one thing to think about when positioning your bimini is where is it going to sit when its down?  i mounted mine so when its down its resting on my thermostat housing of the engine and i put a little snap/strap there so it doesnt go flying around when im towing or driving around when i want it down and its out of the way.  the last thing you want is it sitting on the scoop or in the way of seating.



i also opted out for the provided "stainless wood screws" and went with a small stainless bolt with a large washer on the inside.  just felt more secure. 

Thanks for the help Guys! Mounting it on Sunday . We all need to get a trip in before winter comes

one thing to think about when positioning your bimini is where is it going to sit when its down?  i mounted mine so when its down its resting on my thermostat housing of the engine and i put a little snap/strap there so it doesnt go flying around when im towing or driving around when i want it down and its out of the way.  the last thing you want is it sitting on the scoop or in the way of seating.



i also opted out for the provided "stainless wood screws" and went with a small stainless bolt with a large washer on the inside.  just felt more secure.

Looks like yours in on backwards...the straight end is usually the back row bar as to lay it flat down when in tow/not in use. I also have a double mount for in tow. You can see the parallel strap to pole and second mount for tow in front of rear strap...

i was thinking that and i thought i posted somewhere asking which way it should go.  i got it on ebay and the instructions were pretty terrible.  ill go flip it around. heh.

Yes sir swap that sucker around and you will be good to go