Post up your cool work pics

« **Reply #175 on:** December 04, 2013, 07:08:23 AM »

Quote from: carrera202 on November 18, 2013, 10:34:47 PM

Sce I build substations

Sent from my iPhone using SoCalJetBoats

you guys hiring id love to get in with sce. I'm a super now and we do all commercial construction. Getting tired of it tho want something with better benefits and something different.

Sent from my iPhone 5 using SoCalJetBoats mobile app

« **Reply #176 on:** December 04, 2013, 07:17:56 AM »

Quote from: 5150whiteboy on December 04, 2013, 07:08:23 AM

you guys hiring id love to get in with sce. I'm a super now and we do all commercial construction. Getting tired of it tho want something with better benefits and something different.

Sent from my iPhone 5 using SoCalJetBoats mobile app

we are always hiring unfortunately all I could do for ya is say put my name as a reference there's a ton of jobs right now just look at something that qualifies you even if it's not interesting then if you get it 6 months later transfer out any questions feel free to hit me up

Sent from my iPhone using SoCalJetBoats

« **Reply #177 on:** December 04, 2013, 07:19:31 AM »

Quote from: carrera202 on December 04, 2013, 07:17:56 AM

we are always hiring unfortunately all I could do for ya is say put my name as a reference there's a ton of jobs right now just look at something that qualifies you even if it's not interesting then if you get it 6 months later transfer out any questions feel free to hit me up

Sent from my iPhone using SoCalJetBoats

koo thx ill look at the website later today.

Sent from my iPhone 5 using SoCalJetBoats mobile app

« **Reply #178 on:** December 05, 2013, 08:45:24 AM »

I'm a finish carpenter.
Mouldings, doors, Windows, cabinets, custom stuff mainly.
We build everything on site generally.
Beams and columns are all done in poplar.
Raised panels are MDF, and crown moulding inside the beams is MDF as well.
We are not doing the kitchen on this job but we are handling all the other wood work through out.

-beerjet-

« **Reply #179 on:** December 05, 2013, 08:50:53 AM »

Got crown moulding?
Measure once, cut once, assemble it once....

-beerjet-

« **Reply #180 on:** December 05, 2013, 08:53:57 AM »

Nail it up!

-beerjet-

« **Reply #181 on:** December 05, 2013, 09:57:29 AM »

Been workin at the budweiser brewing and bottling plant in van nuys. I work for an electrical contractor. Too bad im a coors guy =

Sent from my iPhone using SoCalJetBoats

« **Reply #182 on:** December 05, 2013, 01:16:55 PM »

Quote from: beerjet on December 05, 2013, 08:53:57 AM

Nail it up!

-beerjet-

Damn Beerjet- You the man! Ive done crown moulding, chair rail, and baseboards before and its a PITA! Looks great. I measure twice (sometimes 3 or 4), cut once; but i guess thats why your the professional!!

« **Reply #183 on:** December 05, 2013, 01:27:28 PM »

Quote from: JBASHAM on December 05, 2013, 01:16:55 PM

Damn Beerjet- You the man! Ive done crown moulding, chair rail, and baseboards before and its a PITA! Looks great. I measure twice (sometimes 3 or 4), cut once; but i guess thats why your the professional!!

Thanks!
We do a lot of it
At one house we measured and cut 600+ feet and installed 400+ feet in a day.
Or more.... cant really remember.

-beerjet-

« **Reply #184 on:** December 05, 2013, 03:21:43 PM »

Good

Sent from my SCH-I535 using SoCalJetBoats mobile app

« **Reply #185 on:** December 08, 2013, 06:27:25 PM »

I like pipes Lots and lots of pipes

« **Reply #186 on:** December 09, 2013, 01:12:14 AM »

Quote from: pipes on December 08, 2013, 06:27:25 PM

I like pipes Lots and lots of pipes

Is that for a heated side walk

Sent from my iPhone using SoCalJetBoats

« **Reply #187 on:** December 09, 2013, 11:43:13 AM »

Work..

Sent from my iPhone using SoCalJetBoats

« **Reply #188 on:** December 09, 2013, 04:22:24 PM »

Dat nabbit those are some tuff cuts nice work.

Sent from my SCH-I545 using SoCalJetBoats mobile app

« **Reply #189 on:** December 09, 2013, 04:23:37 PM »

That's for beer jet nice work

Sent from my SCH-I545 using SoCalJetBoats mobile app

« **Reply #190 on:** December 09, 2013, 06:43:56 PM »

That's a very good guess Randog. It is low temp radiant heating in concrete slab for a truck repair shop. Here's a couple more pics. Waste oil boilers 350000 btu each. It was a fun project

« **Reply #191 on:** December 09, 2013, 08:05:28 PM »

Quote from: pipes on December 09, 2013, 06:43:56 PM

That's a very good guess Randog. It is low temp radiant heating in concrete slab for a truck repair shop. Here's a couple more pics. Waste oil boilers 350000 btu each. It was a fun project

I did all the grading for the side walk in big bear last summer and the ran that kind of set up for 300 feet or so that never gets any sun pretty cool

Sent from my iPhone using SoCalJetBoats

« **Reply #192 on:** December 09, 2013, 11:19:48 PM »

For pipes.

Had to do a weekend boiler change out the weekend before Thanksgiving.

Trying to find the befores, but here are some afters. BTW, all tradtional soldered joints, drained Friday night, back up and running Sunday night.

« **Reply #193 on:** April 12, 2014, 07:08:14 PM »

I hope you Fockers at Blue Water have been having fun while the rest of us working stiff are stuck on the job. I5/210 S/B truck route 45000 lbs of rice finally home drinking a silver bullet wishing I was a Blue Water with you Fockers!!!

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #194 on:** April 12, 2014, 07:10:06 PM »

Oops hit send button to early

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #195 on:** April 12, 2014, 07:59:31 PM »

Of course had to be DHE truck. That company needs to be shut down asap. Not sure how they are still in business with their pos trucks and their non English speaking drivers.

« **Reply #196 on:** April 12, 2014, 08:03:54 PM »

The office

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #197 on:** April 27, 2014, 12:39:15 PM »

I weld and repair things in aluminum, and sometimes use conventional lathe and mills. We make casting house equipment, just wish I could do this in California instead of Washington!!

« **Reply #198 on:** April 27, 2014, 12:43:21 PM »

That pic of the cylinder is the ram that controls the table that the molten aluminum flows to, for an ingot, or billet casting. It's in a cement chamber mounted below ground, and usually 20 to 30 feet in length depending on customers needs.

« **Reply #199 on:** April 27, 2014, 06:51:21 PM »

This is a shower I designed and built last week

Sent from my iPhone using SoCal Jet Boats

5150whiteboy

carrera202

5150whiteboy

beerjet

beerjet

beerjet

Bunger

JBASHAM

beerjet

renegade

pipes

randog

74 SleekCraft

rush1

rush1

pipes

randog

GT Jets

5oclocksomewhere

5oclocksomewhere

GeneralLee

havasuman

Ken

Ken

Ecm101