What did you do to your boat today?

« **Reply #225 on:** March 26, 2014, 03:17:59 PM »

Powder coated my motor mounts, plates, water pump cover, etc just now. Lime green with a little metallic thrown in for sparkle haha next step is to start on my interior so it matches. Oh and also finish my motor. Haha

Life is uncertain. Don't sip.

« **Reply #226 on:** March 26, 2014, 03:18:27 PM »

Pic

Life is uncertain. Don't sip.

« **Reply #227 on:** March 26, 2014, 05:12:31 PM »

Quote from: tamsone6 on March 26, 2014, 03:18:27 PM

Pic

Life is uncertain. Don't sip.

Looking good love that green.

« **Reply #228 on:** March 26, 2014, 05:28:11 PM »

X2 pertty. I ordered a new forward reverse cable from place..

« **Reply #229 on:** March 26, 2014, 06:51:33 PM »

Quote from: GeneralLee on March 26, 2014, 05:12:31 PM

Looking good love that green.

Thanks! I wanted to do a candy green but I didn't feel like doing the two stage stuff so I went with this one. It's actually pretty close with the metallic flake. The only blemishes are in the front motor plate where the bead blaster found some pits in the aluminum. Oh well, at least it's way under there and you can hardly see it.

Life is uncertain. Don't sip.

« **Reply #230 on:** March 26, 2014, 09:38:38 PM »

Love the lime green. Did the same with my boat!!! All the accents are that color

SRC

Sent from my iPhone using SoCalJetBoats

« **Reply #231 on:** March 26, 2014, 09:40:35 PM »

Pump came back.....
Tighter than my high school prom date.....

-beerjet-

« **Reply #232 on:** March 27, 2014, 03:31:51 PM »

New guages

Sent from my iPhone using SoCalJetBoats

« **Reply #233 on:** March 27, 2014, 09:31:45 PM »

Baked, blasted, decked, bored, and honed my 460. Also took off some pistons and reconditioned my truck rods.

Life is uncertain. Don't sip.

« **Reply #234 on:** March 27, 2014, 09:39:17 PM »

Life is uncertain. Don't sip.

« **Reply #235 on:** March 27, 2014, 10:01:59 PM »

Got my CF #s done today

Sent with my Fingers

« **Reply #236 on:** March 29, 2014, 02:05:06 PM »

Quote from: MorePower on March 27, 2014, 10:01:59 PM

Got my CF #s done today

Sent with my Fingers

Looks good! Need to get mine done as well.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #237 on:** March 29, 2014, 04:50:08 PM »

Just finished bunks!!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #238 on:** March 29, 2014, 05:19:25 PM »

Did a lot of procrastination...

Sent from my iPad using SoCalJetBoats

« **Reply #239 on:** March 29, 2014, 06:43:56 PM »

Installed the new rims, tires, and lugs. Then drove up to JBP for new energizer pump. Almost time to get wet! Representin with gold stickers on both sides.

Sent from my iPhone using SoCalJetBoats

« **Reply #240 on:** March 29, 2014, 07:48:04 PM »

Who's old charger is that back there ?

Sent from my SCH-I545 using SoCal Jet Boats mobile app

« **Reply #241 on:** March 29, 2014, 08:13:03 PM »

Good eye. It is one of the local shop owners' car. It is clean. Black interior (buckets), auto trans. Car is for sale 15k is what he is asking. Runs and drives great. That's what I have been told by my friend who owns the shop next door. I can get you a phone number if you want.

Sent from my iPhone using SoCalJetBoats

« **Reply #242 on:** March 29, 2014, 08:34:18 PM »

Finally yanked the motor. Wish me luck gents here it begins.

« **Reply #243 on:** March 29, 2014, 11:58:41 PM »

Quote from: GeneralLee on March 29, 2014, 08:34:18 PM

Finally yanked the motor. Wish me luck gents here it begins.

And the fun begins!
I just got everything tied up today. First test tomorrow

Sent with my Fingers

« **Reply #244 on:** March 30, 2014, 07:27:09 AM »

Quote from: Roadrunner on March 29, 2014, 08:13:03 PM

Good eye. It is one of the local shop owners' car. It is clean. Black interior (buckets), auto trans. Car is for sale 15k is what he is asking. Runs and drives great. That's what I have been told by my friend who owns the shop next door. I can get you a phone number if you want.

Sent from my iPhone using SoCalJetBoats

I wish I can't spend that kind of coins right now I'm saving for my daughter's wedding next year.

Sent from my SCH-I545 using SoCal Jet Boats mobile app

« **Reply #245 on:** March 30, 2014, 09:27:20 AM »

Gonna finally install the Edlebrock manifold

I got,after breaking one of the studs in the head removing the old one...

should be ready to fire today..then detail time!

« **Reply #246 on:** March 30, 2014, 02:12:14 PM »

Installed a new ball valve, got rid of this ancient gate valve that's been on it since the 70's

Sent from my iPhone using SoCal Jet Boats

« **Reply #247 on:** March 30, 2014, 02:16:37 PM »

Quote from: Riverlife_ on March 30, 2014, 02:12:14 PM

Installed a new ball valve, got rid of this ancient gate valve that's been on it since the 70's

Sent from my iPhone using SoCal Jet Boats

Not going to say it.....

GT

« **Reply #248 on:** March 30, 2014, 02:20:28 PM »

Quote from: GT Jets on March 30, 2014, 02:16:37 PM

Not going to say it.....

GT

Say what?!

Sent from my iPhone using SoCal Jet Boats

« **Reply #249 on:** March 30, 2014, 02:22:49 PM »

Quote from: Riverlife_ on March 30, 2014, 02:20:28 PM

Say what?!

Sent from my iPhone using SoCal Jet Boats

Going to go about it this way...

How are you going to control the flow rate without the infinite adjust-ability of the gate valve? Why do you think that valve was there since the 70's?

GT

tamsone6

tamsone6

GeneralLee

Squirrel Master

tamsone6

Kroggy3771

beerjet

Bunger

tamsone6

tamsone6

MorePower

cmayer

gsmitty

tpltrbl303

Roadrunner

rush1

Roadrunner

GeneralLee

MorePower

rush1

skee

Riverlife_

GT Jets

Riverlife_

GT Jets