What did you do to your boat today?

« **Reply #4075 on:** June 16, 2016, 08:08:51 PM »

Spent the last few days cleaning up under the hatch doing some powder coating, polishing, and adding a few new parts.

Sent from my iPhone using SoCal Jet Boats

« **Reply #4076 on:** June 16, 2016, 08:25:56 PM »

Buff and polish. Its clean! Sell! Sell! Sell!

« **Reply #4077 on:** June 16, 2016, 08:32:45 PM »

Ditched the 2 step button Deal and used the hole for another drain plug since mine are 1/2 npt

« **Reply #4078 on:** June 16, 2016, 11:21:06 PM »

Getting the interior back together

Sent from my iPhone using SoCal Jet Boats

« **Reply #4079 on:** June 17, 2016, 08:25:59 AM »

hooked up the amp and speakers....
finally have some tunes blasting

« **Reply #4080 on:** June 17, 2016, 10:59:00 PM »

Ground out spider cracks 😩 thought it was a small area and they just kept getting bigger and bigger never done it before, any advice would be appreciated !!🍻

Sent from my iPhone using SoCal Jet Boats

« **Reply #4081 on:** June 18, 2016, 12:14:50 AM »

Quote from: gavieboy on June 17, 2016, 10:59:00 PM

Ground out spider cracks 😩 thought it was a small area and they just kept getting bigger and bigger never done it before, any advice would be appreciated !!🍻

Sent from my iPhone using SoCal Jet Boats

This is exactly why pro. fiberglase shops get sooo much $$$ for their work!!

« **Reply #4082 on:** June 18, 2016, 06:28:04 PM »

Put this anchor back in the boat where it belongs lol

« **Reply #4083 on:** June 19, 2016, 08:41:59 AM »

I'd say rough that up with some 80 grit and lay a layer of mat then a layer of woven down then start with filler and microballons feather it out till its smooth then paint

Sent from my iPhone using SoCal Jet Boats

« **Reply #4084 on:** June 19, 2016, 08:45:44 AM »

Thank you

Sent from my iPhone using SoCal Jet Boats

« **Reply #4085 on:** June 19, 2016, 04:45:08 PM »

Motor is almost shot so i filled her full of oil yet again...and drove the piss out of her and met up with a buddy that just got his back together up here in missouri

« **Reply #4086 on:** June 19, 2016, 06:20:55 PM »

After striping 8 coats of paint finally got to re paint the pump

Sent from my iPhone using SoCal Jet Boats

« **Reply #4087 on:** June 19, 2016, 07:15:19 PM »

I tired fiberglassing a second battery support today. Not to happy with the way the fiber glass came out.

Sent from somewhere in Cali

« **Reply #4088 on:** June 20, 2016, 10:07:10 AM »

Quote from: selbycnlb on June 19, 2016, 08:41:59 AM

I'd say rough that up with some 80 grit and lay a layer of mat then a layer of woven down then start with filler and microballons feather it out till its smooth then paint

Sent from my iPhone using SoCal Jet Boats

What kind of filler do you use

Sent from my iPhone using SoCal Jet Boats

« **Reply #4089 on:** June 20, 2016, 10:11:03 AM »

Got the interior back together and in ,motor mounts done and fired her up

Sent from my iPhone using SoCal Jet Boats

« **Reply #4090 on:** June 20, 2016, 09:46:28 PM »

My friend came by with his torch and cut two holes in my trailer for some brake lights.

Sent from somewhere in Cali

« **Reply #4091 on:** June 21, 2016, 01:36:36 PM »

Quote from: gavieboy on June 20, 2016, 10:07:10 AM

What kind of filler do you use

Sent from my iPhone using SoCal Jet Boats

I just go with west systems #407 filler for large fairing. And some polyester putty for final fairing before primer

Sent from my iPhone using SoCal Jet Boats

« **Reply #4092 on:** June 21, 2016, 09:12:24 PM »

Interior installed, waiting on gauges in the mail. Be on the water soon 🙌🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #4093 on:** June 21, 2016, 10:10:09 PM »

Did some port work on the intake ( thanks Jim )

« **Reply #4094 on:** June 23, 2016, 10:05:42 AM »

Threw on some kicker 6x9's last night

Sent from my iPhone using SoCal Jet Boats

« **Reply #4095 on:** June 23, 2016, 05:15:06 PM »

Pump is in 👊🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #4096 on:** June 23, 2016, 05:16:40 PM »

Didn't do squat to the Mach 1 but did this instead in Powell

Sent from my iPhone using Tapatalk

« **Reply #4097 on:** June 23, 2016, 10:23:06 PM »

We made some good progress on the motor today. Here's a pic

« **Reply #4098 on:** June 23, 2016, 10:29:44 PM »

Will try again

« **Reply #4099 on:** June 24, 2016, 12:07:26 PM »

Damn looking great 77 inifinity. I changed the oil and belt today gettin her ready for tomorrow

Oliver1421

FordLover

steves86ta

nickm

TheJasonMurphy

gavieboy

vwagon13

rivrrts429

selbycnlb

gavieboy

08chevyguy

B.CR33CH

coors909

gavieboy

nickm

coors909

selbycnlb

73sidewinderguy

77 inifinity

nickm

B.CR33CH

willowvalley

77 inifinity

77 inifinity

08chevyguy