I really want a Gopro, but everytime I get close to buying one I decide I'd rather have a $300 boat part 

Here's a video off my phone if the link is right

I ran 88 on GPS earlier in the day, one handed wasn't gonna work at that speed so I backed off a little early

that thing scoots! what is your engine/ pump set up?

HD Hero2?

BBC 468
4 Bolt Main
Forged Crank
GM heavy Duty 7/16 Rods
Clevite Main & Rod Bearings. MS829H – CB743HN
Hamburgers 10 qt Oil Pan with Mellings HV Pump
JE Flat Top Pistons & Rings 8.1 Compression
(Spec’s to Bob Teague’s Recommendation) (Machine work at Adam’s Metalizing in Lancaster)
Comp Cam 11-568-4 Nitrous HP Lift 284/305, Intake 575, Exhaust 595, 113 lobe separation.
Comp Valve Springs 924-16 (2800rpm – 6800rpm)
Comp Pro Magnum Lifters Hydraulic Flat Tappet
Iron Square Port Heads fresh with Ports cleaned up
Teague 1.7 Roller Rockers
Manley Push Rods
Edlebrock Victor Jr Intake Port Matched
M3 Pro Charger with Intercooler pushing 9 psi.
QFT blow through carb 750 cfm. (Carb good to 1000HP per QFT - I'm not there)
Aeromotive pump and regulator fuel system designed for this application.
MSD Ignition
Basset Headers

Jet is in progress this season

Stock Berkeley 12JB intake with stuffer
AA Impeller
JBP Agressor 9 Vane Bowl with stuffer
Place Diverter

Tried full droop last weekend, to loose. Going back to Place Diverter HP Steering nozzle, it has a little wedge in it and makes my boat track straight through the water really well.

Nice job look into a ride plate soon 👍