Wtb oil cooler

« **on:** January 19, 2020, 07:33:23 PM »

Looking to by Dan Olsen oil cooler for Mark 4 big chevy for racing comp jet this year , thanks😎

« **Reply #1 on:** January 20, 2020, 08:32:32 AM »

My .2 cents brother is to buy a new one . I bought a used one and had to replace the caps as they were corroded and were leaking and had to get the tube bundle ultrasonic cleaned as there was build up in the tubes . After all that I could of bought a new one for another couple of hundred more .

Sent from my iPhone using SoCal Jet Boats

« **Reply #2 on:** January 20, 2020, 09:39:04 AM »

Ok thank you ,do you race comp jet ? Not sure about a lot of things about circle racing , I drag race my boat but the oil doesn't get hot enough for a oil cooler , I do run my boat pretty hard I have an oil temp doesn't seem to get to hot though, any more 2 cents would be great thanks

« **Reply #3 on:** January 20, 2020, 06:44:36 PM »

Quote from: Rogers57x on January 20, 2020, 09:39:04 AM

Ok thank you ,do you race comp jet ? Not sure about a lot of things about circle racing , I drag race my boat but the oil doesn't get hot enough for a oil cooler , I do run my boat pretty hard I have an oil temp doesn't seem to get to hot though, any more 2 cents would be great thanks

I run a v-Drive and my boat is an ol GN race boat . I built the motor to run max rpm all day long lol my temp with the oil cooler runs about 120-130 and am happy with that . If ur gona run circle then u will most definitely need it , also run a double oil filter application as it will help big time on cooling as well . Put it this way I run Parker dam to dam wot and never lift lol 17 miles of pure joy lol . Some pics of my boat then and now lol

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #4 on:** January 21, 2020, 12:19:31 PM »

Quote from: bobjthomson on January 20, 2020, 06:44:36 PM

I run a v-Drive and my boat is an ol GN race boat . I built the motor to run max rpm all day long lol my temp with the oil cooler runs about 120-130 and am happy with that . If ur gona run circle then u will most definitely need it , also run a double oil filter application as it will help big time on cooling as well . Put it this way I run Parker dam to dam wot and never lift lol 17 miles of pure joy lol . Some pics of my boat then and now lol

Sent from my iPhone using SoCal Jet Boats mobile app

Those Howard v-drives are bad ass

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #5 on:** January 22, 2020, 01:46:06 PM »

Quote from: K-034 on January 21, 2020, 12:19:31 PM

Those Howard v-drives are bad ass

Sent from my iPhone using SoCal Jet Boats mobile app

Lol it’s Schiada 19’ but Howard did splash a few of those hulls

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #6 on:** January 25, 2020, 11:37:56 AM »

Thanks for the info, what oil cooler do you run ? Have a friend who has a gil marine set up , I heard Dan Olsen coolers are good also , that's s bad ass hotrod you got 👍,been wanting to do some hauling ass in Parker some day , plan on racing at the regatta thanksgiving this year thanks again for your help😎

« **Reply #7 on:** January 26, 2020, 08:10:12 AM »

I run dan Olsen oil cooler and it works bitchin . Also run a trans cooler as well lol also run a double oil filter set up as this helps with cooling .

Sent from my iPhone using SoCal Jet Boats mobile app

Rogers57x

Wtb oil cooler

bobjthomson

Re: Wtb oil cooler

Rogers57x

Re: Wtb oil cooler

bobjthomson

Re: Wtb oil cooler

K-034

Re: Wtb oil cooler

bobjthomson

Re: Wtb oil cooler

Rogers57x

Re: Wtb oil cooler

bobjthomson

Re: Wtb oil cooler