1977 Brendella(Hondo Pantera bottom) for Sale less motor

« **Reply #51 on:** January 24, 2008, 03:34:31 PM »

Quote from: Brad @ SoCalJetBoats.com on January 24, 2008, 03:33:30 PM

there you go brad, put a rail kit in the liberty

« **Reply #52 on:** January 24, 2008, 03:45:21 PM »

sorry to jack your thread Brendella....but lets talk

I will PM ya.

« **Reply #53 on:** January 24, 2008, 04:26:45 PM »

Boat still for sale!

« **Reply #54 on:** January 24, 2008, 06:33:57 PM »

Quote from: Brendellajet on January 24, 2008, 03:16:23 PM

Damn, you got killed on the pricing...My plates came from a piece of 2x2 6061 and I paid no more than 35.

This (http://www.adi-aero.com/adi/index.htm) is where I work. Metal is not a problem, I just don't have time. If I could get sketches or something I could do it here... I just haven't done it before and have no idea how it's done.

This is what we build out of Titanium, Aluminum and steel.

If I can't do it personally, the resources are all around me...

« **Reply #55 on:** January 24, 2008, 08:53:24 PM »

I think Superdave013 has them. I think his name is Larry Nebb on the powerboats site. If you post up over there Im pretty sure someone has some cad files or atleast some layouts with the bolt hole locations...The hard part is locating the crankshaft centerline for YOUR boat.

I took a bare block, with a piece of straight pipe running through the mains and with the mounts rough cut, trimmed until the straight pipe would slide over the pump shaft. I purposely didn't make it perfect(but got it close) so the ujoints in the driveline get some use.

Im sure with the cad files or even the layouts(if hotboat comes back they are on that site) Im sure someone at your work can whittle those things out in nothing flat. Up to you to final fit. Otherwise Id be glad to help out, would just need some measurements from you.

« **Reply #56 on:** January 26, 2008, 11:33:05 AM »

If someone wants this boat with motor I have one available.

« **Reply #57 on:** January 26, 2008, 04:49:08 PM »

I want that boat without motor, I have to see what my tax return is going to be like!

« **Reply #58 on:** January 26, 2008, 05:41:57 PM »

Quote from: Brendellajet on December 31, 2007, 04:12:43 PM

Clean boat! Full stringers, no cracks, fresh white paint. Setback stage 3 MPD 12WJ pump, shoe, rideplate,worked bowl, impeller, custom loader, droop, diverter. Nice rail kit for BBC. Direct drive alternator, all new wiring throughout, no hacked wires. New black marine carpet. All new cables, billet foot throttle, billet fuel caps, stainless 15 gallon Imco's(2). Refurbed helm, billet hub. Jeff Bennett Bottom. Super comfy lowback corbeau seats. Clean double axle trailer, good tires, all new bearings. 1 hour on boat/pump after full resto.

**Note boat also has cavitation plate recesses for those of you who are interested in racing in circles. This boat hauls the mail in chop. Come check it out.

What it needs: A motor, gauges, plumbing and rub rail. Boat has Fresh paint but was never color sanded. Plenty of clear there to do so and in the sunlight you can hardly look at it-very bright.

$4000 obo.

Call Brian, 949-838-5303

Note-Mods, sorry if this is in the wrong place. Its not exactly turnkey, but not really a project either...

« **Reply #59 on:** January 28, 2008, 10:56:04 AM »

Lots of tire kickers lately...

« **Reply #60 on:** January 28, 2008, 01:46:58 PM »

bump for a sweet boat, good luck with the sale

« **Reply #61 on:** January 29, 2008, 11:26:23 AM »

Thanks Fork.

Would somebody buy this if I put a berk in it?

« **Reply #62 on:** January 29, 2008, 12:44:13 PM »

If you put a Berk in it, I would consider buying the Jacuzzi.

First bid, $50.00

That is the SCJB special, right?

« **Reply #63 on:** January 29, 2008, 12:47:57 PM »

LOL, id put the Jacuzzi in my other boat. Im not afraid of them. I've seen what a good WJ can do...On the other hand, if someone wants the boat less pump, the Jacuzzi may be up for sale. I wont sell for less than $1500 though. Considering what I've got in it ($3k) thats a good deal.

« **Reply #64 on:** January 29, 2008, 02:02:43 PM »

Is there any way to cram more than 2 people in there?

« **Reply #65 on:** January 29, 2008, 02:04:10 PM »

Quote from: Blue on January 29, 2008, 02:02:43 PM

Is there any way to cram more than 2 people in there?

Depends, are you Mexican american?

« **Reply #66 on:** January 29, 2008, 02:06:31 PM »

Quote from: Blue on January 29, 2008, 02:02:43 PM

Is there any way to cram more than 2 people in there?

corbeau has some bench seats you could throw back there and they would match the front...

http://www.corbeau.com/products/baja_bench/baja_bench.shtml

« **Reply #67 on:** January 29, 2008, 02:09:15 PM »

This is totally the caliber of boat I want but dammit i drag around people and tubes etc. Hmmm

« **Reply #68 on:** January 29, 2008, 02:11:05 PM »

Quote from: Blue on January 29, 2008, 02:09:15 PM

This is totally the caliber of boat I want but dammit i drag around people and tubes etc. Hmmm

sell the family.

« **Reply #69 on:** January 29, 2008, 02:16:45 PM »

Thats fockn funny right there

« **Reply #70 on:** January 29, 2008, 02:21:32 PM »

Quote from: Blue on January 29, 2008, 02:02:43 PM

Is there any way to cram more than 2 people in there?

Absolutely. When I got the boat it had seating for 4 adults(5 if you get cozy). You would need to buy the boat without the current seats and put in some fiberglass buckets and then a bench would fit no problem. You would probably want to run the alternator in a standard configuration as well instead of the direct drive, or build the back seat around it

« **Reply #71 on:** January 29, 2008, 02:29:58 PM »

Note: These seats aren’t in the corbeau catalog. I bought the GTA low backs and shortened them about 6 inches. For the back seat I was going to buy another one, shorten it and widen it and then have it reupholstered to match. Im 6 feet tall and the placement as is right now is perfect provided your legs are as long as mine. There is room to move the foot pedal forward and the front seats as well which would make some more room for a back seat. There is very little room to store things like inflatables though, not that it couldn’t be done, you would just need to be creative-like put a swimstep on it and tie inflatables to that, or-you could always just drag them…

« **Reply #72 on:** January 29, 2008, 05:29:51 PM »

We need to talk I ! I am going to call you tonight.

« **Reply #73 on:** January 29, 2008, 05:59:24 PM »

Pending Sale.

« **Reply #74 on:** January 29, 2008, 06:08:42 PM »

Someone is going to get a fresh boat.....

Brad @ SCJB

Ralph Brunt

Brad @ SCJB

Brendellajet

UNDONE

Brendellajet

Brendellajet

MORBEER

Brendellajet

Brendellajet

FORKEDUP

Brendellajet

crewchief22

Brendellajet

Blue

pw_Tony

Brad @ SCJB

Blue

Brad @ SCJB

Blue

Brendellajet

Brendellajet

MORBEER

Brendellajet

Hava Al