10 quart pan drain plug

« **on:** September 11, 2016, 01:42:43 PM »

So I just got a 10 quart pan for my motor and the drain plug is on the opposite side it's on the left side now instead of the right, away from the water drain out of the jet so how do you go about draining the oil? Do you run a hose from the pan and through the transom? Or another hole on the left of the jet housing? any advice would be great

« **Reply #1 on:** September 11, 2016, 01:54:32 PM »

Quote from: scotticq on September 11, 2016, 01:42:43 PM

So I just got a 10 quart pan for my motor and the drain plug is on the opposite side it's on the left side now instead of the right, away from the water drain out of the jet so how do you go about draining the oil? Do you run a hose from the pan and through the transom? Or another hole on the left of the jet housing? any advice would be great

They should all have a drain kit installed. Oil never hits my bilges.

GT

« **Reply #2 on:** September 11, 2016, 02:05:40 PM »

What kind of kit

« **Reply #3 on:** September 11, 2016, 02:37:38 PM »

I use the Jabsco kit.

https://www.amazon.com/Jabsco-Permanent-Drain-Hose-Fitting/dp/B00144EGNS

Also, pick up some cheap wire shower curtain rings to hold the end of the hose up out of the bilge.

« **Reply #4 on:** September 11, 2016, 03:35:37 PM »

I have the same problem. Thanks GT.

Sent from my iPad using SoCal Jet Boats

scotticq

10 quart pan drain plug

GT Jets

Re: 10 quart pan drain plug

scotticq

Re: 10 quart pan drain plug

GT Jets

Re: 10 quart pan drain plug

shadow3621

Re: 10 quart pan drain plug