360 chryler engine whrs a good place to find parts? I kno its a small engine ...

« **on:** June 19, 2016, 10:13:14 PM »

[/URL]
Whrs a good place to find parts looking for an intake manifold a lil rise. I kno shes a lil crusty takn my time fixing her up. Ford carburator

Sent from my iPhone using SoCal Jet Boats

« **Reply #1 on:** June 19, 2016, 11:24:04 PM »

That's a B engine or possibly an RB. The displacement should be stamped on a pad near the distributor. B engine displacements are 350, 361, 383 (B) and 400 with a deck height of 9.980". RB engine displacements are 383 (RB), 413, 426 (Wedge), and 440 with a deck height of 10.725".

You really need to be sure which engine block and heads you have before selecting an intake.

By the way, kudos for attempting Mopar power.

« **Reply #2 on:** June 20, 2016, 09:12:02 AM »

Doesn't look like an RB from the pic but hard to tell. The valve covers look to be very close to the intake flange, where the RB's have a bit of space due to longer stroke. Easiest motor in the world to stroke on the cheap. Tons of possibilities here along with good info http://www.440source.com/ I have a few contacts if you need help with a build, but even stock parts can be used to slap a 440 crank in a 383 block and end up with bigger, stronger and faster.

« **Reply #3 on:** June 20, 2016, 09:28:32 AM »

Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT

« **Reply #4 on:** June 20, 2016, 09:41:41 AM »

Quote from: GT Jets on June 20, 2016, 09:28:32 AM

Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT

I was going to say the same thing. It's a AMC

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** June 20, 2016, 10:24:53 AM »

Quote from: GT Jets on June 20, 2016, 09:28:32 AM

Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT

Quote from: Bigblockchevy1691 on June 20, 2016, 09:41:41 AM

I was going to say the same thing. It's a AMC

Sent from my iPhone using SoCal Jet Boats

I concur. I had to walk all the way out to my shop and look at my 440. The B/RB distributor angles up and to the right. The picture clearly shows up and to the left. Definitely isn't a Mopar LA 360. All Most Chrysler.

« **Reply #6 on:** June 20, 2016, 01:45:48 PM »

Fok I'm getting old. I put my 70 Super Bee into storage nearly 30 years ago now. Always told myself that when my Dad passed away I would use some of his estate to build me a lill something to whet a middle age crisis. But times change and I built a monster moto machine instead. She went 1-1 at the World Championships in April right out of the box.
Sorry for the thread jack.

Lwoody77

360 chryler engine whrs a good place to find parts? I kno its a small engine ...

Flusher

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...

GlassCutter

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...

GT Jets

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...

Bigblockchevy1691

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...

Flusher

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...

GlassCutter

Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...