What’s going on good people I’m having troubles starting the boat up. Replaced Intake manifold and carb over the winter with a new fuel regulator . Took out distributor without marking 🤦🏽‍♂️ location. Seems like engine is not getting enough fuel or spark. Maybe timing? Can anyone chime in with some help.

Also is the way I have my fuel regulator correct ??


Sent from my iPhone using SoCal Jet Boats mobile app

Find tdc slide in distributor...then fire her up to do timing

Sent from my SM-G960U using SoCal Jet Boats mobile app

Funny little thing we did when trying our first fire on my BFF is we had the distributor in backwards at TDC. Lets just say the engine didn't like that. Spun it around and BAM fired right up.

Sent from my LG-TP450 using SoCal Jet Boats mobile app

Finally got it going


Sent from my iPhone using SoCal Jet Boats

I kept messing with the timing .. I’m thinking of getting new rotor and cap maybe it intermittent works.


Sent from my iPhone using SoCal Jet Boats

Couldn’t hurt. Just get to TDC again and mark the shaft and #1 rotor location with a sharpy before removing it.


Sent from my iPhone using SoCal Jet Boats

Once it becomes turn key again i will... new to engines and this boat taught me a lot so far with the help of others on here!!!


Sent from my iPad using SoCal Jet Boats mobile app