Adjusting your valves

« **on:** February 05, 2015, 02:25:24 PM »

Okay you guys I have maybe 5 6 hours on my motor only they pulled nine passes on the dyno before I ran it she runs great but I hear that you guys run your valves a lot I don't know how hook it up teach me how or any of you vega boys want to come by and show me how to run my valves what's up

« **Reply #1 on:** February 05, 2015, 02:27:13 PM »

Hydraulic or solid cam?

« **Reply #2 on:** February 05, 2015, 02:43:49 PM »

Hydraulic

« **Reply #3 on:** February 05, 2015, 02:44:06 PM »

Scorpion roller rockers

« **Reply #4 on:** February 05, 2015, 03:00:40 PM »

Hydraulic should not require you to adjust them often. I would say once a season would be good. I adjust my solids every other trip. I think most guys adjust hydraulic by tighten till they stop chattering and the a half turn.

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** February 05, 2015, 03:14:21 PM »

So 5 hours dont mess with em

« **Reply #6 on:** February 05, 2015, 03:22:40 PM »

Unless you have excessive valve noise I wouldn't worry about adjusting them

Sent from my DROID RAZR HD using SoCal Jet Boats mobile app

« **Reply #7 on:** February 05, 2015, 03:23:59 PM »

X2 Hydraulic lifters don't move that much. Solids do though. I run my valves every night at the races just to make sure. I use EOIC Exaust Opening Intake Closing to adjust lash.
Here's a good video on YouTube that explains it.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #8 on:** February 05, 2015, 03:26:22 PM »

No noise at all awsome thanks man

Squirrel Master

Adjusting your valves

Chad89GT

Re: Adjusting your valves

Squirrel Master

Re: Adjusting your valves

Squirrel Master

Re: Adjusting your valves

jimpen

Re: Adjusting your valves

Squirrel Master

Re: Adjusting your valves

Maker

Re: Adjusting your valves

jyeager

Re: Adjusting your valves

Squirrel Master

Re: Adjusting your valves