bbc on stays running with key constantly turned?

« **on:** July 12, 2014, 04:30:04 PM »

sooooo i got the engine in fixed the flwx plate starter grinding noise..but engine wont stay started unless ur holding key on constantly? any body got any suggestions? all are welcome lol

« **Reply #1 on:** July 12, 2014, 04:45:38 PM »

Quote from: JOE COASTIE on July 12, 2014, 04:30:04 PM

sooooo i got the engine in fixed the flwx plate starter grinding noise..but engine wont stay started unless ur holding key on constantly? any body got any suggestions? all are welcome lol

you got a couple wires cross up.
Power should be on before you bump the key.
Im no sparky though.

-beerjet-

« **Reply #2 on:** July 12, 2014, 06:29:16 PM »

Quote from: beerjet on July 12, 2014, 04:45:38 PM

you got a couple wires cross up.
Power should be on before you bump the key.
Im no sparky though.

-beerjet-

ok so thx beerjet...heres wat im working with...the ballast resistor is broke...so for now i hav no power to key aux...how do i bypass the resistor just to get her tuned untill i get new block or resistor?

Sent from my PantechP9070 using SoCal Jet Boats mobile app

« **Reply #3 on:** July 12, 2014, 06:35:46 PM »

Quote from: JOE COASTIE on July 12, 2014, 06:29:16 PM

ok so thx beerjet...heres wat im working with...the ballast resistor is broke...so for now i hav no power to key aux...how do i bypass the resistor just to get her tuned untill i get new block or resistor?

Sent from my PantechP9070 using SoCal Jet Boats mobile app

Again, I dont do any kind of wiring but I wouldn't bypass it.
They aren't that much money, not enough to risk frying something else.
Hopefully someone with some kind of electrical know how can figure it out but the that's my .02 ....

-beerjet-

« **Reply #4 on:** July 12, 2014, 07:55:37 PM »

Ballast resistor? What kind of ignition are you running? Points distributor??

Sent from my iPhone using SoCalJetBoats

« **Reply #5 on:** July 12, 2014, 10:01:38 PM »

Quote from: JBASHAM on July 12, 2014, 07:55:37 PM

Ballast resistor? What kind of ignition are you running? Points distributor??

Sent from my iPhone using SoCalJetBoats

i just down loaded a schematic of the wire block and thats wat they called...its the reset switch that controls over load to the wiring block...its a electronic ignition.

Sent from my PantechP9070 using SoCal Jet Boats mobile app

« **Reply #6 on:** July 13, 2014, 08:59:00 AM »

^ that sounds like a circuit breaker....you should have power to ignition (coil) during START (SOL) AND RUN (IGN) from ignition switch

Sent from my SCH-I535 using SoCalJetBoats mobile app

« **Reply #7 on:** July 13, 2014, 09:57:15 AM »

Quote from: el mojado on July 13, 2014, 08:59:00 AM

^ that sounds like a circuit breaker....you should have power to ignition (coil) during START (SOL) AND RUN (IGN) from ignition switch

Yes, so it is a circuit breaker so i need a new one, i have some wires fracked up because im not getting juice to IGN RUN side, only getting juice in START pos...When i turn key to RUN or AUX pos, i should see gauges jump.

« **Reply #8 on:** July 17, 2014, 08:16:36 AM »

problem solved, just had some wires in the wrong place

. Thanks you all for the help..

JOE COASTIE

bbc on stays running with key constantly turned?

beerjet

Re: bbc on stays running with key constantly turned?

JOE COASTIE

Re: bbc on stays running with key constantly turned?

beerjet

Re: bbc on stays running with key constantly turned?

JBASHAM

Re: bbc on stays running with key constantly turned?

JOE COASTIE

Re: bbc on stays running with key constantly turned?

el mojado

Re: bbc on stays running with key constantly turned?

JOE COASTIE

Re: bbc on stays running with key constantly turned?

JOE COASTIE

Re: bbc on stays running with key constantly turned?