So what's the best bet for a starter for my BBC in my Daytona 19.  It's 11:1 compression, .30 over, dual quads, nothing too crazy.

Once the motor goes back in I can't get to the starter to change it out so I want to make sure whatever I use is going to last.

OEM starter or something marine specific, MSD, others?

Thanks, Walt

Be careful what you buy.  A china no-name starter distributor will not swim out and push start your boat.  I sell and promote American IMI high torque starters because they work and you can buy service parts for them when they wear out.  11.0:1 is above normal and you should buy a higher torque starter.  Most china import starters are stock replacements and aren't designed to work with higher compression applications over 9.5:1.  You should be able to buy an IMI starter for less than $250, and call someone in the US for straight talk tech. answers.  Hope this helps.
John

Damn this phone!! Powermaster!

Sent from my MB860 using SoCal Jet Boats mobile app

On the pricey side, but I run a Meziere starter. Good for 7 or 8 hundred cubic inches.
You are able to clock the starter into different positions. Which may help in the tight situation have.

Corvette starter from Vatozone. Out of an LS motor.

vatozone!!!lmfao

Sent from my MB860 using SoCal Jet Boats mobile app