Cam bearing install..

« **on:** October 08, 2013, 04:55:55 PM »

Does anyone know how to do this? I'm in Elsinore and looking for someone who could come and do it. I don't have the tool to do it.

Sent from my iPhone using SoCalJetBoats

« **Reply #1 on:** October 08, 2013, 05:37:48 PM »

Even is you're going to do the build yourself, it's easier to have a machine shop, clean, check and install cam bearings. It shouldn't cost much.

« **Reply #2 on:** October 08, 2013, 05:51:43 PM »

Take it to the shop

Sent from my SGH-T999 using SoCalJetBoats mobile app

« **Reply #3 on:** October 08, 2013, 06:02:13 PM »

Yeah I agree. Each bearing has to be clocked a certain way for proper oiling, if not done properly u will smoke the cam in no time. Take it to a machine shop.

Sent from my iPhone using SoCalJetBoats

« **Reply #4 on:** October 08, 2013, 08:05:27 PM »

X2 it's not difficult if you have the tools and are familiar with using them. Better off having them do it.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #5 on:** October 08, 2013, 09:16:58 PM »

Ok that was my second option, the machine shop.

Sent from my iPhone using SoCalJetBoats

93_ultra

Cam bearing install..

crewchief22

Re: Cam bearing install..

berkbryan

Re: Cam bearing install..

JBASHAM

Re: Cam bearing install..

Jet Boat Maloney

Re: Cam bearing install..

93_ultra

Re: Cam bearing install..