So I'm going to just rewire the boat. I had some electrical issues at the avi with wires breaking so I'm thinking a short term patch isn't the solution here, thanks to the SCJB crew for jumping in and getting me through the weekend!

I'm going to order this kit from CP but is there anything I should know or any heads up before I gut this thing.

2 issues i already see are 1, this kit has no wiring for the lights, not that they worked anyways. And 2, I have dual tanks and there is a switch on the dash which switches the fuel tank gauge between the two. I'm sure I'm going to have to modify it but thought I'd ask first!




Sent from my iPhone using SoCal Jet Boats

Ah! So that probably explains why I have 3 wires crammed into each terminal on the ignition switch.


Sent from my iPhone using SoCal Jet Boats

So, Ill throw this out there. I searched a lot of the posts on here last night and it seems like building my own harness is doable. I have some basic electrical knowledge and ive done stereos and stuff. I am sure I could build it and ad my additional accessories with a little time and patience and do a nice clean job but is it worth it? I know it would save a couple bucks but thats not necessarily my concern, just wondering what the consensus is. Take the time and do it right, or spend the money and do it right now? Thanks for the input!

Plan it out carefully and it should go as smooth or better as if u bought the kit. I made mine from scratch. I made up a schematic including lights and stereo. Patience.

I cheated and bought the harness  as well. Had it installed and supported in about and hour. To me the money was worth more then the patients.