Damaged crank

« **on:** August 10, 2017, 11:44:12 PM »

I was moving my crank in the back of my truck and it nicked a corner of my block and has a large scratch on the journal and is not incredibly deep but it catches your fingernail slightly and I want to know if I need to get it cleaned up again or just screw it and buy a new crank that's not ground at all? Any advice helps !

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #1 on:** August 10, 2017, 11:59:26 PM »

Bostick to the rescue!!!! If it has never been machined before, I would think you could just have them all machined and polished equally and be fine but, I'm no expert by any means.

Sent from my SM-G930T using SoCal Jet Boats mobile app

« **Reply #2 on:** August 11, 2017, 01:48:38 PM »

just got the crank ground 10 10 two days ago, that's the bummer

Sent from my iPhone using SoCal Jet Boats

« **Reply #3 on:** August 11, 2017, 01:49:00 PM »

Yup

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** August 11, 2017, 01:52:59 PM »

Sorry , was in the wrong convo , get it repolished it should be ok , won't harm the bearings , we do this on high pressure pumps all the time and seems to help with lube .

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** August 11, 2017, 02:15:40 PM »

Talked to my engin guy , polish and install

Sent from my iPhone using SoCal Jet Boats

bshaw

Damaged crank

Shocker_04

Re: Damaged crank

bshaw

Re: Damaged crank

bobjthomson

Re: Damaged crank

bobjthomson

Re: Damaged crank

bobjthomson

Re: Damaged crank