New to jet boats so i apologize in advance for any stupid questions... I got this boat 2 weeks ago and it started fine and ran before I made the purchase from the seller.. The seller got it on a trade and couldn't tell me much about the motor, thinking that buying the boat without that info may have been a bad idea... Anyway, got the boat home and went to start he boat and the starter was not engaging the flex plate... Replaced the starter ands got it shimmed the best I could and it started fine.. Got out to the lake and was about 3/4 of the way around and hit a wake and the butter flys on the air scoop closed and killed the motor... Went to start the motor again and got this horrible metal on metal screeching sound a sound like a bell was being hit from the back of the motor... My buddy and I figure it was the starter again but when unfit home and was reading topics in the internet I found it may be the flex plate is cracked causing the starter to not be shimmed correctly... Any help would be greatly appreciated
Sent from my iPhone using SoCal Jet Boats