so i bought this mallory promaster coil and its nothing like the old bullet type that was on the boat. so im tryin to figure out where to mount it? it says DO NOT MOUNT TO ENGINE...so i thinkin because of the vibration..
but mounting to the trasom just seems to far away. so i was thinking of makeing a bracket or something and mounting to the engine with some kind of insulating deal... any ideas or options would be grate

thanks

yes dog house comes all the way out . hmm to the stingers ? isnt that a little or alot low ? i mean i really have never swamped it...but what if i do ? that would kill it wouldnt it ?

get rid of it and go back to a HEI...

get rid of it and go back to a HEI...

lol yha this is what im workin with...and im going with it !  i just need to figure out the best way

and i just dont want to run a 2ft coil wire

Simple enough to mount it to the doghouse with it's supplied bracket. Pops off the bracket with 1 screw, lay it on the engine then remove the doghouse. Could also wire it using a 4 pin trailer connector so simply unplug it, pop the wire off the dizzy and leave it on the doghouse when you remove it.

Problem with either of those solutions is no way, really, to run it with the doghouse removed, which would bother me greatly.

Don't know on yours, but both my cruisers had the batteries mounted to the stringers on either side of the pump driveshaft. Could quickly and easily weld a vertical plate off the top of one of the hold downs to mount it to. Be pretty close to your dizzy, and if it gets THAT swamped.......I think you'll be giving the "abandon ship" order...... 

Ray