My new bullet

« **Reply #25 on:** August 11, 2015, 09:13:10 AM »

10/4 will do! 👍🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #26 on:** August 11, 2015, 11:26:16 AM »

I would think 800 hp plus and close on tq

« **Reply #27 on:** August 11, 2015, 11:38:59 AM »

Let's get a few more cracks at it and I'll let the cat out of the bag....

Sent from my iPhone using SoCal Jet Boats

« **Reply #28 on:** August 11, 2015, 12:00:19 PM »

717hp/732tq

Sent with my Fingers

« **Reply #29 on:** August 11, 2015, 12:02:41 PM »

738hp 769tq

"RTCP"

« **Reply #30 on:** August 11, 2015, 12:10:29 PM »

725 hp 750tq

« **Reply #31 on:** August 11, 2015, 12:11:35 PM »

The little pump gas motor did

853hp at 5700

And

883tq at 4600

Sent from my iPhone using SoCal Jet Boats

« **Reply #32 on:** August 11, 2015, 12:12:04 PM »

Quote from: Blue2184 on August 11, 2015, 12:11:35 PM

The little pump gas motor did

853hp at 5700

And

883tq at 4600

Sent from my iPhone using SoCal Jet Boats

oh chit! Congrats!!

"RTCP"

« **Reply #33 on:** August 11, 2015, 12:13:46 PM »

Quote from: Blue2184 on August 11, 2015, 12:11:35 PM

The little pump gas motor did

853hp at 5700

And

883tq at 4600

Sent from my iPhone using SoCal Jet Boats

Nice!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #34 on:** August 11, 2015, 12:16:50 PM »

I think we prob left a little on the table not being able to take it past 5900rpms? But don't know if I need to chase the hp when it's making that kind of torque down low?

Sent from my iPhone using SoCal Jet Boats

« **Reply #35 on:** August 11, 2015, 12:49:34 PM »

Quote from: Blue2184 on August 11, 2015, 12:16:50 PM

I think we prob left a little on the table not being able to take it past 5900rpms? But don't know if I need to chase the hp when it's making that kind of torque down low?

Sent from my iPhone using SoCal Jet Boats

Depending on what's been done to your pump, I doubt seriously you left anything on the table, if were in a big bodied Chevelle with a Powerglide I would keep digging. In your jet, this thing will be "all in" at 5,500rpm.

Just my personal opinion based on past experience.

Thing should rock pretty good.

GT

« **Reply #36 on:** August 11, 2015, 01:17:40 PM »

Thanks for all the replies guys!! I'm with you gt! Gonna set the pump up to turn about 5500 to 5700 rpms and let er eat!! 😎

Sent from my iPhone using SoCal Jet Boats

« **Reply #37 on:** August 11, 2015, 08:19:08 PM »

That kicks ass. Right on!

Sent from my iPhone using SoCal Jet Boats

« **Reply #38 on:** August 11, 2015, 08:48:08 PM »

Badass

« **Reply #39 on:** November 22, 2015, 04:55:27 PM »

Well finally got the pump all set up and got the new mill set into the boat and wired and plumed... Finally got to hear it make noise for the first time in the boat... Still need to put it on the hose and set the timing and dial in the carb but it's alive! 😎👍🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #40 on:** November 22, 2015, 04:57:40 PM »

I cut the race mufflers off of those upswepts and welded some I think good looking collectors on them... Now just have to get them coated...

Sent from my iPhone using SoCal Jet Boats

« **Reply #41 on:** November 22, 2015, 06:03:35 PM »

What heads did you use? Are they small cc ? Threw me off because the Pistons look dish

Sent from my iPhone using SoCal Jet Boats

« **Reply #42 on:** November 22, 2015, 06:37:59 PM »

119cc combustion chamber and 358cc runner

Sent from my iPhone using SoCal Jet Boats

« **Reply #43 on:** November 22, 2015, 08:44:13 PM »

Looks really nice!

Sent from somewhere in Cali

« **Reply #44 on:** November 22, 2015, 09:13:37 PM »

That float is awesome nice build man. Is it an eliminator hull?

Sent from my iPhone using SoCal Jet Boats

« **Reply #45 on:** November 23, 2015, 05:05:05 AM »

Thanks guys... Yes it's a 1976 eliminator bubble deck ss model..

Sent from my iPhone using SoCal Jet Boats

« **Reply #46 on:** November 23, 2015, 04:44:44 PM »

Quote from: Blue2184 on November 22, 2015, 06:37:59 PM

119cc combustion chamber and 358cc runner

What make head if you don't mind me asking? That thing should be pretty snappy with the power it's making

Sent from my iPhone using SoCal Jet Boats

Sent from my iPhone using SoCal Jet Boats

« **Reply #47 on:** November 23, 2015, 04:52:42 PM »

It's the blueprint head that they sell for their 632 crate motor... Throttle response sounds awesome! I can't wait to get this thing in the water and kick the chit out of it! 😎

Sent from my iPhone using SoCal Jet Boats

« **Reply #48 on:** November 23, 2015, 06:34:00 PM »

Quote from: Blue2184 on November 23, 2015, 04:52:42 PM

It's the blueprint head that they sell for their 632 crate motor... Throttle response sounds awesome! I can't wait to get this thing in the water and kick the chit out of it! 😎

Sent from my iPhone using SoCal Jet Boats

Nice. I'd be pumped to hit the water too!!!

Sent from my iPhone using SoCal Jet Boats

Blue2184

DDP1084

Blue2184

MorePower

capogniracing

78southwindtdeck

Blue2184

capogniracing

East County Kona

Blue2184

GT Jets

Blue2184

Bryndenmurray@gmail.com

81sprint

Blue2184

Blue2184

Derrick

Blue2184

coors909

tmorgan

Blue2184

Derrick

Blue2184

Derrick