Water in oil?

« **on:** May 12, 2017, 02:34:06 PM »

Getting ready to pull motor to clean and replace core plugs, pulled the valve covers off for shits and giggles and noticed milkshake oil inside.. any thoughts on where the water could be coming from?

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #1 on:** May 12, 2017, 02:37:00 PM »

Here's some pics

Sent from my iPhone using SoCal Jet Boats mobile app

« **Reply #2 on:** May 12, 2017, 05:43:10 PM »

Do you have over transom headers ? If so the water flow has to stop at idle or water will get sucked in through the exhaust due to valve overlap.

Sent from my iPhone using Tapatalk

« **Reply #3 on:** May 13, 2017, 01:22:13 AM »

Yes I have over transom headers.. Is the idle speed and water ratio controlled by the T valve?

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** May 13, 2017, 05:14:05 AM »

There is tons of info on this on the web. Here is a link to some info I found. http://www.bassettracing.com/faq1.htm

Sent from my iPhone using Tapatalk

« **Reply #5 on:** May 13, 2017, 07:42:59 AM »

Is the dip stick milky too? It could just becondensation that worked its way up. If your dipstick shows clean oil then your good

Sent from my iPhone using SoCal Jet Boats

« **Reply #6 on:** May 13, 2017, 02:04:19 PM »

Yeah the dipstick oil is all fine no milky oil in the pan either about to replace it since I have the engine out anyways

Sent from my iPhone using SoCal Jet Boats

aburns122

Water in oil?

aburns122

Re: Water in oil?

Huey

Water in oil?

aburns122

Re: Water in oil?

Huey

Re: Water in oil?

Bunger

Re: Water in oil?

aburns122

Re: Water in oil?