hi all this is my first posting. I could really use some help. I recently bought a 74 sleekcraft with a 454 and a jucuzzi jet. It need lots of attention when i got it. I took it out for a test run and ran fine, but when i got it home to do a reassurance inspection i found a fair amount of water in the oil. found the problem and fixed it, but need to know what i should do to clear out the water after an oil and filter change of course . Any tricks tips or knowledge would be helpful and any recomended oil types i should run. thanks for your help.......

If you get the oil temp above 212 deg. the water will just boil out.  A few passes at WOT should heat it up enough.

not much u  can do but change it  maybee with a cheep oil and filter run it for a few drain and put synthetic in it i myself like valvaline just my thougthts good luck

My thoughts also. My boat used to sit outside and it would get condensation everywhere and after a good run it would all go away .

-beerjet-