Top Com Hilborn Fuel injection from manifold, all 8 stackes, gas injection pump which was rebuilt by Hilborn, mint condition all needles flowed for 500ci + motor. with roller cam. and mag uint is manditory atleast a 1.7 amp all injection is mecanical all new bushings all hoses and metering blocks. this is the shizznet fuel injection. a total virgin never been port matched and/or polished. The top of the line hard to find old school stackes. everything to put on any big block chevy. will out perform carbs of any size. This is top of the line Hilborn everything complete, even the screws for the injector stacks. in Racingjunk, and Ebay I'm asking $3200.00 To boat people only $2600.00 and I'll help you set it up. with the right heads you'll scream with power. I did. I ate everyone alive with a sleeper. I have zoomies, and bassett headers fully ceramicaly coated that will go perfect with this set up.
Even the proper heads, also a set of .60 4.25 11.1 CP racing pistons, with Brooks-65 aluminum rods, with BBC .60 4 blot block with billet caps, and fully notched for the rods, and stroked 4130 RPM Billet crank nerelled,chamfered fully magnet and ultalsonically tested. I'll even have it performed in front of anyone. this stuff only ran for 15 min's 2 times and I had Daivd at DNE tear the motor down because the people that built it before David seen it I felt were way over their heads in building a blown alky motor. I'm glad I did everything is mint still and David is currently building the Top Alky I need. Nothing wrong with this stuff, but DNE and myself wanted to build a 1900+ Davids way. with all new shit. "No Cottrell crap".
