BBF 460 Stuff Lower Prices

« **on:** March 17, 2010, 07:10:37 PM »

Here is a list of what I have that I need to sale. Dont wanna do it but I have to.

D0ve-c heads non ported in good shape w/comp cams springs - $200

Milodon Oil Pan (Gold) I believe its an 8 qt pan front sump. Dirty in pics but will be clean - SOLD

Moroso Aluminum Valve Covers (Gold) - $50

460 Block Casting D1ve bored .030 over (needs a honing, other than that in good shape) - $100

Weiand Tunnel ram w/interchangeable top polished(set up for two 4bbl now) - SOLD

Comp Cams Camshaft #34-331-4 Specs: http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=989&sb=2
Also have double chain timing set with harmonic balancer for it as well. - $100 for all

Ford crankshaft 2y (needs one of the rod journals polished) Internally balanced - $30

MSD Ignition Box MSD 6A - SOLD

MSD Coil Blaster 2 $30

Pm me on here or feel free to give me a call 760-576-7152 Robert

« **Reply #1 on:** March 17, 2010, 07:13:56 PM »

« **Reply #2 on:** March 17, 2010, 07:21:06 PM »

Oh yeah no lifters. I do have the pushrods however 3 of them will need to be replaced due to slight rusting. All prices are OBO and I can ship at your cost.

« **Reply #3 on:** March 17, 2010, 08:40:10 PM »

more pics

« **Reply #4 on:** March 29, 2010, 06:48:21 PM »

Robert word is you have a motor to drop in

thats going to put you in the water this summer

« **Reply #5 on:** March 29, 2010, 06:50:34 PM »

Hopefully. I should have it by fri sat. Thank god for good friends (and thier dads). He's got money and is going to run a fully built and stroked 460 with blower. Hand me downs are awesome!

« **Reply #6 on:** March 29, 2010, 06:53:10 PM »

what size are the valves and are they s/s
do the heads come as pictured with rockers and guide plates?
thanks ralph

oh yeah, what is the rocker arm ratio

« **Reply #7 on:** March 29, 2010, 07:44:14 PM »

valves are stock oem. non s.s. no roller rockers but the studs and guide plates are there and the rockers were 1.73's.

« **Reply #8 on:** March 29, 2010, 07:50:55 PM »

Quote from: bertus on March 29, 2010, 07:44:14 PM

valves are stock oem. non s.s. no roller rockers but the studs and guide plates are there and the rockers were 1.73's.

thanks bro,
i'll pass

« **Reply #9 on:** April 16, 2010, 01:33:45 PM »

I'll take the valve covers if you still have them

« **Reply #10 on:** April 16, 2010, 08:10:04 PM »

Yes I do still have them. They are cleaned and ready to go.

« **Reply #11 on:** April 23, 2010, 02:54:09 PM »

V.C.'s sold

« **Reply #12 on:** April 26, 2010, 09:25:08 AM »

Alright so i need to move this stuff asap as i am moving and would prefer not to lug it all around with me. Sooo new prices:

D1VE block already .030 over needs honing - $30
D0VE-C Heads stock valves w/studs for roller rockers from comp cams ready to bolt on and go - $100
Comp cams cam #34-331-4 - $50 w/double chain timing set
Ford 2y crankshaft .010 undersize freshly polished internally balanced - $30
Ford 2y crankshaft needs polish/undersize - $10
Msd blaster 2 ignition coil - $10

Call/text/pm Rob at 760-576-7152

« **Reply #13 on:** April 26, 2010, 09:32:10 AM »

I'll take the DOVE-C heads. Have they been maged?

« **Reply #14 on:** April 26, 2010, 05:10:23 PM »

No they have not been magged. they were fine when i pulled them off the block the only thing i have done since then is pulled the roller rockers off.

« **Reply #15 on:** April 26, 2010, 09:22:06 PM »

I am in San Diego and you are in Temecula , any chance you would want to meet in the middle and I will bring cash?

« **Reply #16 on:** April 27, 2010, 06:33:22 PM »

sounds good i will actually be down there tomorrow afternoon.

« **Reply #17 on:** April 27, 2010, 06:33:58 PM »

if you want give me a call at 760-576-7152

« **Reply #18 on:** May 09, 2010, 04:45:42 PM »

is the block still for sale? r u willing to ship it? i think thats what i need.

« **Reply #19 on:** May 16, 2010, 10:32:16 AM »

Are the heads and cam still avail?

« **Reply #20 on:** May 16, 2010, 11:46:01 AM »

Quote from: 77witchcraftcruiser on May 16, 2010, 10:32:16 AM

Are the heads and cam still avail?

I am still waitng to meet up and pay for the heads , There mine!

« **Reply #21 on:** May 27, 2010, 05:01:39 PM »

sorry mark the heads are toast. had them magges and there were a few cracks in them and two of the exhaust valves were leaking at 40%

bertus

bertus

bertus

bertus

BOOST

bertus

Ralph Brunt

bertus

Ralph Brunt

avengerdaycruiser

bertus

bertus

bertus

Marcsrollin

bertus

Marcsrollin

bertus

bertus

bunch140

77witchcraftcruiser

Marcsrollin

bertus