fresh 548 pump gas engine 775hp @ 6200 668trq @ 5500 gen 6 8.2 block bored .030 over 10.2:1 comp, line bored, scat forged crank detailed by Castillo, eagle h beam rods with arp 2000 bolts,  srp small domed pistons, seal pro rings naiper second, rings gaped for small amount of nitrous mls head gaskets brand new AFR 325 cnc heads, manley push rods, crane gold rockers 1.7 rr on ex crane 1.8 rr on in, straub cust ground cam shaft, morel 842 solid roller lifter. cloyes  billet double roller, edelbrock victor (new) holley 1050 dominator (new) B&B 10 qrt jet oil pan (new) blueprinted oil pump (new) msd crank trigger ign, aerospace vac pump, needs ign box and a fuel pump to run!!  looking to get $7500

Got any pics

fresh 548 pump gas engine 775hp @ 6200 668trq @ 5500 gen 6 8.2 block bored .030 over 10.2:1 comp, line bored, scat forged crank detailed by Castillo, eagle h beam rods with arp 2000 bolts,  srp small domed pistons, seal pro rings naiper second, rings gaped for small amount of nitrous mls head gaskets brand new AFR 325 cnc heads, manley push rods, crane gold rockers 1.7 rr on ex crane 1.8 rr on in, straub cust ground cam shaft, morel 842 solid roller lifter. cloyes  billet double roller, edelbrock victor (new) holley 1050 dominator (new) B&B 10 qrt jet oil pan (new) blueprinted oil pump (new) msd crank trigger ign, aerospace vac pump, needs ign box and a fuel pump to run!!  looking to get $7500

Damn wish I had the cash!

Someone's getting a bitchin deal


Sent from my iPad using SoCalJetBoats

Just a heads up with this deal, it is the same combo I ran in the blue boat for six years. The only thing different is, it does not have a tunnel ram. The old combo made 801 @6200  that why I subtracted the hp I did with the single. The engine is not complete at the moment, just need to tie up a few loose ends. I opted to put new lifters rather than the rebuilt morals in it and am waiting on the carb and lifters. It also will have a nos plate system on it. The only used parts are the crank, rods, pistons and cam, which were all sent out and got the seal of approval. I would really like to dyno this engine before I let it go or at minimum put it in my boat and put it through the paces. If it goes to the dyno the price will reflect the additional charge in it. Im basically giving this thing away at the price listed.

Yeah your giving it away such a nice  guy 😜


Sent from my iPhone using SoCal Jet Boats

price it all out slim, that's about 50 cents on the dollar to build it. plus its not used up. Its fresh   

Or I could just put it in the Turkey boat and break it of real deep in you. hahahaha

thats a bad ass deal Tim! 👍👍 wish I had money for a spare.


"RTCP"

I want can I pay with monopoly money.

We're are you located?


Sent from my iPhone using SoCal Jet Boats

Orange ca

Pics !!!

The vector
Needs this


Sent from my iPhone using SoCalJetBoats

Few changes were made. It now has a reher Morrison cnc victor and a pro systems 1250 dominator. It's ready to go to the dyno. I did not put the plate system on it but I do have it. The headers are not for sale and the price will reflect the dyno cost. I just want everything to be tits when it sells. After the dyno it's all on the new owner lol


Sent from my iPhone using Tapatalk

I'm about to go take out a loan.....😍😍😍


Sent from my iPad using SoCalJetBoats

Ok  it's off the dyno and ready to go. Made 700 ft# at 5k and 748@ 6400. That is with out the vac pump. Makes 774 @ 6400 with vac pump. Belt broke before final pulls. Air fuel is tits and had great oil pressure. If you put a tunnel ram with a couple 1050's it will make over 800 no problem. Remember this is a pump gas engine.


Sent from my iPhone using Tapatalk

How about a motor raffle 160 tickets for $50 count me in for two

Sold


Sent from my iPhone using Tapatalk