Got a Eddie marine oil cooler setup I just pulled off my boat. Ran once at Elsinore for about and hour and realized i had too much oil in my motor causing high oil temps so I don't need it. Paid about 350 for the whole setup. 250$ takes the cooler, mounts, sand which adapter and the lines of you want em.


Sent from my iPhone using SoCal Jet Boats

What are the dimensions of the cooler? And what size are the lines, sixes and eights? Thank you sir!

Plummed*


Sent from my iPhone using SoCal Jet Boats

Pm sent

Sold it aWhile back sorry


Sent from my iPhone using SoCal Jet Boats

Oil ports are 1/2" and Plummer with -8 and water ports are 3/4" Plummer -10.  I believe the cooler is 12" long by 2 1/8" diameter. I think overall with all fittings connected it's about 18" long


Sent from my iPhone using SoCal Jet Boats

Bunger, the mounting brackets , they were 2-inch inch?
I see where you took the water from, but where did you dump it?
 And your water pressure, was it about 10 maybe 12 pounds?
 Thanks for the info. To install it shortly.

What brand of cooler was that? Where did you pick it up?


Sent from my iPhone using SoCal Jet Boats

It's Eddie marine. I bought it off a guy on performance boats. He bought it and never used it. I think they run like 130-150$ on eddies website


Sent from my iPhone using SoCal Jet Boats