Null


Pages: [1]

bigred88

  • Karma: +0/-0
rods pistons howards cam eddy intake
« on: August 22, 2013, 12:28:18 PM »
hey fellas been takin break from the ol 77 wrkin on the new project the block is cracked so I wont be using anything out of this motor havent taken the shortblock apart yet but if anyone wants sum of this stuff I can tear it down the pistons dnt have part number# stamped in top so im assuming there a probably cast type factory replacment piston they look like the old 396 425hp replacement piston not sure if there cast or not? I havent mic yhe bore either so unsure of exact size just kno its 396 block I will mic them if someone interested the rods are probably usuable aswell also have a solid howards cam guy says they were new lifters I prob wouldnt use em but they can go with it if u want em free and have this eddy intake guys says was new also it looks very new and with a cleanin I think could pass as new intake sry dnt have much info just workin on a 454 shortblock this one just sittin the block is junk intake is oval

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

santeerob619

  • Karma: +1/-0
Re: rods pistons howards cam eddy intake
« Reply #1 on: August 22, 2013, 01:18:43 PM »
Depending on the size of those pistons i might be interested? Do you have the 396 heads?

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Logged
  • Boat #1: 1969 Tahiti
  • Boat #2: 1977 Southwind Tunnel Dragster
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #2 on: August 22, 2013, 02:43:25 PM »
I can mic the pistons for ya I have 2 sets of ovals I can sell but the 781's that were on it im using I have sum 702's closed chamber 396-427 heads and an open chamber oval dnt remember casting number nothing special think its a 236 or somethan I can mic thise pistons and post up the size prob by saturfay when im around the boat

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #3 on: August 22, 2013, 04:27:30 PM »
these are lookin like the GM TRW 396 ls6? factory replacement piston? what u guys think

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #4 on: August 22, 2013, 04:32:52 PM »
will there be part# on the bottom side maybe?

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

crewchief22

  • Karma: +66/-0
Re: rods pistons howards cam eddy intake
« Reply #5 on: August 23, 2013, 09:24:51 PM »
How much for the intake manifold?  I'm looking for one for the daughters C10 build.
Logged
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #6 on: August 23, 2013, 10:13:12 PM »
anything for u chief! my dads been building a 69 for long while my favorite trucks just make me reasonable offer and its yours

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

el mojado

  • Karma: +15/-0
Re: rods pistons howards cam eddy intake
« Reply #7 on: August 24, 2013, 07:01:00 AM »
Sq port or oval port intake? How much? Where are u at?

Sent from my SCH-I535 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
I once tried to NOT have a good time. It just didn't work out!

74hondo

  • Karma: +8/-0
Re: rods pistons howards cam eddy intake
« Reply #8 on: August 24, 2013, 07:20:22 AM »
Any idea on the crank? Have a buddy at work interested.


Sent from my iPhone using SoCalJetBoats mobile app
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #9 on: August 24, 2013, 09:46:17 AM »
this thing was knockin super hard! I havent takin it apart yet but im sure the crank is probably trashed im sure its been turned before ive been busy but plan on tryin to get my cherry picker back from my old man so I can pull it out and get everything tore dwn for everyone by end of weekend but I got talked into goin to the lake today im headin that way now weather super mild today and havent ripped up the 77 in couple weeks! everything is make offer shoot me a reasonable price and its yours aint tryin to make money really just tryin help socal buddys if they need sum stuff I do have a 427 crank in my shop somewere think its been turned .10 I could prob sell ill have to check casting number im sure it steel been in shop for years wanted to keep it thinkin ill use it one day but hell if someone wants it ill sell it for the new project shoot me offer on the intake as long as crew chief dnt want it unfortunately im in yhe midwest and everything will have to be shipped as long as shipping is paid I dnt mind shippin anything o and sry to guy interested in pistons I promise I will mic them this evening and get the size posted up! sry for the large run on sentence! socal rox

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #10 on: August 24, 2013, 10:20:20 AM »
hey cheif when u said c10 I just assumed u meant 67-72 truck its first thing comes to mind 71 was my first truck if it is 67-72 post a pic always love seein those trucks! if u want this intake ill take 90-100 bucks if thats reasonable price plus shippin and ill clean it up a lil before it ships

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

santeerob619

  • Karma: +1/-0
Re: rods pistons howards cam eddy intake
« Reply #11 on: August 24, 2013, 11:08:57 AM »
I m in no rush on the pistons. I just miced my 396 block and its 60 over. I do have the 6223 396/ 427 nodular crank out of it if you're still looking 74hondo. I'm in SD.

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Logged
  • Boat #1: 1969 Tahiti
  • Boat #2: 1977 Southwind Tunnel Dragster
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

crewchief22

  • Karma: +66/-0
Re: rods pistons howards cam eddy intake
« Reply #12 on: August 24, 2013, 11:30:15 AM »
Quote from: bigred88 on August 24, 2013, 10:20:20 AM
hey cheif when u said c10 I just assumed u meant 67-72 truck its first thing comes to mind 71 was my first truck if it is 67-72 post a pic always love seein those trucks! if u want this intake ill take 90-100 bucks if thats reasonable price plus shippin and ill clean it up a lil before it ships

Sent from my GT-P3113 using SoCalJetBoats mobile app

It's a '71 C10 long bed.  I'll get some pics posted once I get a few more collected of the build.  Going with a 454/th400 combo so the daughter will have plenty of power to get down the street to high school without any issues  ;D
Logged
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #13 on: August 24, 2013, 07:30:02 PM »
thats awesome chief! so cool there still people out there building first cars with there kids and of course the kid is completly involved in the build and will appreciate that much more my dad did it for me and I plan on doin it for my daughter we she of age she is 5 now and already wants a hello kitty jet boat and a mustang! she put hello kitty sticker on my 77 she put it right up front u can prob see it in this pick if u zoom in a lil lol u wantin this intake chief? pm me with address or u can call or txt if u wanna haggle lol 918-500-6451 or the other guys askin bout the intake shoot me message

Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bigred88

  • Karma: +0/-0
Re: rods pistons howards cam eddy intake
« Reply #14 on: August 24, 2013, 07:34:27 PM »

hello kitty boat its actually really nice float dnt like the seating or the paint of course
Sent from my GT-P3113 using SoCalJetBoats mobile app

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Pages: [1]
 


Null

SMFPacks CMS 1.0.3 © 2026