Boat rail eliminator caps?

« **on:** July 06, 2010, 11:16:40 PM »

I took off the railing on my boat and would like to cap the holes for now, does anyone know where I can get caps, like 3 inch in diameter?

« **Reply #1 on:** July 06, 2010, 11:23:06 PM »

You can try to use OMC ball gear plugs...Part number 908062...

You used to be able to buy a bag of 5 for like $20...Just silicone them on.

Check it out.

GT

« **Reply #2 on:** July 07, 2010, 08:13:24 AM »

are we talkin bow rail or rub rail?

« **Reply #3 on:** July 07, 2010, 08:23:06 AM »

Quote from: sandeggo on July 07, 2010, 08:13:24 AM

are we talkin bow rail or rub rail?

I assumed grab rail.

Here is what I am talking about.. http://www.iboats.com/Ball-Gear-Cover-for-OMC-Sterndrive-Cobra-908062-GLM-22030-Sierra/dm/cart_id.645790878--session_id.624837988--view_id.172936

GT

« **Reply #4 on:** July 07, 2010, 11:00:52 PM »

I am talking about the grab rails, every mount has the 3 holes. I thought I saw an old eliminator the other day with some but I didnt get a chance to talk to the guy or get close enough to look at them

« **Reply #5 on:** July 09, 2010, 08:56:14 AM »

Here's some stainless plugs I had Nick make for my Dads Eliminator 2 1/2 round then I had them powder coated white,Nick made a few more plugs let me know if this will work for you.

« **Reply #6 on:** July 27, 2010, 08:42:11 PM »

those definately look like like something I had in mind. Did you drill them and mount or silicon them on top? I was thinkin of drilling them and running flush stainless bolts through them. Im thinkin thats the best route for me.

KonaGuy

Boat rail eliminator caps?

GT Jets

Re: Boat rail eliminator caps?

sandeggo

Re: Boat rail eliminator caps?

GT Jets

Re: Boat rail eliminator caps?

KonaGuy

Re: Boat rail eliminator caps?

BOOST

Re: Boat rail eliminator caps?

KonaGuy

Re: Boat rail eliminator caps?