Fiberglass

« **on:** June 16, 2014, 07:59:49 PM »

Anyone know roughly how much it costs to get the stringers replaced? And where is a good place to get it done?

Sent from my iPhone using SoCal Jet Boats

« **Reply #1 on:** June 16, 2014, 08:25:53 PM »

Ummm 1500 approximately at a shop. I got a guy in lake elsinore. Boat Bob. You have my number....shoot me a text bro.

« **Reply #2 on:** June 16, 2014, 08:26:14 PM »

Quote from: 74 SleekCraft on June 16, 2014, 07:59:49 PM

Anyone know roughly how much it costs to get the stringers replaced? And where is a good place to get it done?

Sent from my iPhone using SoCal Jet Boats

At least $1500 if you catch the guy on a good day.

-beerjet-

« **Reply #3 on:** June 16, 2014, 08:32:50 PM »

Damn. I can buy a new hull for 1500 lol.

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** June 16, 2014, 08:53:58 PM »

You guys know if there hard to do? I might do it myself it's not that complicated

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** June 16, 2014, 08:59:00 PM »

Quote from: 74 SleekCraft on June 16, 2014, 08:53:58 PM

You guys know if there hard to do? I might do it myself it's not that complicated

Sent from my iPhone using SoCal Jet Boats

Lots of people do....
The actual act of putting them in isn't very hard but all the clean up and cutting them in is where all the hard work is.

-beerjet-

« **Reply #6 on:** June 16, 2014, 09:01:22 PM »

Quote from: beerjet on June 16, 2014, 08:59:00 PM

Lots of people do....
The actual act of putting them in isn't very hard but all the clean up and cutting them in is where all the hard work is.

-beerjet-

you know if there's a certain type of fiberglass you have to use?

Sent from my iPhone using SoCal Jet Boats

« **Reply #7 on:** June 16, 2014, 09:05:03 PM »

Quote from: 74 SleekCraft on June 16, 2014, 08:53:58 PM

You guys know if there hard to do? I might do it myself it's not that complicated

Sent from my iPhone using SoCal Jet Boats

The details are what everyone leaves out....
How much of what kind and so on and so on....
I'm DEFINITELY not the guy to be asking though.
Call some reputable fiberglass shops and see what they say.
Just because some people's boats haven't completely unraveled, doesn't mean they did it right.

-beerjet-

« **Reply #8 on:** June 16, 2014, 09:09:49 PM »

Quote from: beerjet on June 16, 2014, 09:05:03 PM

The details are what everyone leaves out....
How much of what kind and so on and so on....
I'm DEFINITELY not the guy to be asking though.
Call some reputable fiberglass shops and see what they say.
Just because some people's boats haven't completely unraveled, doesn't mean they did it right.

-beerjet-

if I do it I wanna do it right. Don't wanna end flipping the boat and killing someone cuz I wanted to cut corners. You know a good shop that's not gonna charge me for advice? Lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #9 on:** June 16, 2014, 09:14:18 PM »

Quote from: 74 SleekCraft on June 16, 2014, 09:09:49 PM

if I do it I wanna do it right. Don't wanna end flipping the boat and killing someone cuz I wanted to cut corners. You know a good shop that's not gonna charge me for advice? Lol

Sent from my iPhone using SoCal Jet Boats

Use the search function......
Lots of great tips.
So when you do call a shop, you're just ironing out details .

-beerjet-

« **Reply #10 on:** June 16, 2014, 09:16:52 PM »

Quote from: beerjet on June 16, 2014, 09:14:18 PM

Use the search function......
Lots of great tips.
So when you do call a shop, you're just ironing out details .

-beerjet-

cool thank you.

Sent from my iPhone using SoCal Jet Boats

« **Reply #11 on:** June 18, 2014, 06:34:23 AM »

I'm getting ready to do mine the prep work is the worst so far .so much dust and it makes you super itchy.sher fab has the marine polyester resin for around $40 a gallon and from what I read you will needsome where around 3 gallons.i have not bought all my glass yet .so I'm not sure of the price on that yet.im having the wife pick up my 2"x6"×12' at ganahl lumber in Corona they are $40 each piece for Douglas fir kiln dried with a 8% moisture rating. When I'm ready to do it all your more than welcome to help me.lol hope this helps give you an idea of what the cost is.

« **Reply #12 on:** June 18, 2014, 07:56:52 AM »

Quote from: keithwidney on June 18, 2014, 06:34:23 AM

I'm getting ready to do mine the prep work is the worst so far .so much dust and it makes you super itchy.sher fab has the marine polyester resin for around $40 a gallon and from what I read you will needsome where around 3 gallons.i have not bought all my glass yet .so I'm not sure of the price on that yet.im having the wife pick up my 2"x6"×12' at ganahl lumber in Corona they are $40 each piece for Douglas fir kiln dried with a 8% moisture rating. When I'm ready to do it all your more than welcome to help me.lol hope this helps give you an idea of what the cost is.

lmk when your gonna do it. I'll try to come help. I've never really done glass before lol.

Sent from my iPhone using SoCal Jet Boats

« **Reply #13 on:** June 18, 2014, 08:12:01 AM »

Quote from: keithwidney on June 18, 2014, 06:34:23 AM

I'm getting ready to do mine the prep work is the worst so far .so much dust and it makes you super itchy.sher fab has the marine polyester resin for around $40 a gallon and from what I read you will needsome where around 3 gallons.i have not bought all my glass yet .so I'm not sure of the price on that yet.im having the wife pick up my 2"x6"×12' at ganahl lumber in Corona they are $40 each piece for Douglas fir kiln dried with a 8% moisture rating. When I'm ready to do it all your more than welcome to help me.lol hope this helps give you an idea of what the cost is.

how are thing going on that you get what you needed?sounds like your getting down and itchy haha!!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #14 on:** June 18, 2014, 12:47:31 PM »

I need to buy probably 2 more gallons of resin and enough glass to do the stringers.

« **Reply #15 on:** June 18, 2014, 03:11:01 PM »

Just don't buy any resin or glass from home d an expect that to work... The resin at a fiberglass place is the best way to go. The fiber will be real thick and sewn together. I did a bunch of floor glass work last year with blue gel coat over it. Came out sick and is holding up perfectly.

« **Reply #16 on:** July 19, 2014, 11:16:32 PM »

Generally it ranges between 2-3k. It's a very time consuming and labor intensive process and critical to the safe function and value of your boat. Proper procedures are paramount. These include correctly supporting the hull prior to removal of the existing stringers and during placement, correctly selecting, cutting and shaping the replacement stringer materials to fit the hull, hull glass prep to assure adhesion, correct cloth material selection, preparation, application and installation of new glass materials throughout. It's the structural core of the boat. It's like your spine, how important is that? What type of boat do you have, what size etc.? Where are you located, I may be able to help.

« **Reply #17 on:** July 19, 2014, 11:28:45 PM »

Where are you located?

GT

« **Reply #18 on:** July 27, 2014, 07:23:05 AM »

Quote from: GT Jets on July 19, 2014, 11:28:45 PM

Where are you located?

GT

I assume your question is to the op? Or were you asking me of my location? Just wanted to clarify. thx

« **Reply #19 on:** July 27, 2014, 12:23:00 PM »

Quote from: keithwidney on June 18, 2014, 06:34:23 AM

so much dust and it makes you super itchy.

To help with the itching, before you start, shower and get your body very clean. Then cake on baby powder everywhere. The baby powder will work its way into your pores and prevent the fiberglass grinding dust from affecting you so much.

A disposable painter’s suit will help to limit the exposure to your skin and clothing.

When blowing yourself off with shop air, regulate the air pressure down to 30PSI. It is possible to blow particulates into your skin.

Just a friendly reminder, if the particulates are in the air, they are also getting into your lungs. I highly recommend a properly fitted particle filtration respirator and not just a dust mask. IMO, a dust mask will only keep out birds. Keep in mind, the filter elements do not last indefinitely; they are only rated for 8-hours of use and then should be replaced. Replace them sooner if they become clogged with particulates. I advise getting a name brand, like 3M, so that it is easy to find replacement filter elements

Lastly, don’t just throw your clothes into the laundry along with the wife and kid’s at the end of the day. Fiberglass contaminated laundry definitely won’t help your sex life any.

Cheers,

Joe

74 SleekCraft

Fiberglass

GeneralLee

Re: Fiberglass

beerjet

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

beerjet

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

beerjet

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

beerjet

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

keithwidney

Re: Fiberglass

74 SleekCraft

Re: Fiberglass

gsmitty

Re: Fiberglass

keithwidney

Re: Fiberglass

Your Mom

Re: Fiberglass

damfoo

Re: Fiberglass

GT Jets

Re: Fiberglass

damfoo

Re: Fiberglass

Flusher

Re: Fiberglass