[aquaholic72]

I screwed my message up it was for socaljst1970

Sent from my MB860 using SoCal Jet Boats mobile app

[aquaholic72]

Matches909 stop tryin to rush ur ass whoopin!!!lmfao

Sent from my MB860 using SoCal Jet Boats mobile app

[matches909]

Ya ya I'm just tired of the only boat in our little group being ready for the water

[aquaholic72]

Well... ill give u that,  ur allways ready first to towed in!! Haha

Sent from my MB860 using SoCal Jet Boats mobile app

[matches909]

We are hoping times have changed

[aquaholic72]

U know im f##kin with u.. i luv ur new boat.. its bitchin,, i expect it to run my flatty down..

Sent from my MB860 using SoCal Jet Boats mobile app

[matches909]

I know you are but look at it this way I might be the first to get towed in but I'm always the last one on the lake

[lifted250]

Any ideas on a 4150 vs domnator


Sent from my iPhone using SoCal Jet Boats

[lifted250]

Any ideas on a 4150 vs domnator


Sent from my iPhone using SoCal Jet Boats

[jimpen]

Depends on your needs


Sent from my iPhone using SoCal Jet Boats

[socaljst1970]

Aquaholic - we certainly do miss the reliability and ease of deuces wild.  Was (sure still is) a great boat.  After our first trip to parker last year though, we did decide we wanted a cat deck boat.  More room for the family and smoother in tough water.  The new boat has been a bit rough going to say the least, but I must say this forum rocks and so much help from all has been great.  At this point the 502 is being built up by the guys at QMP and then dyno tuned before going back in - I dont anticipate any engine issues again   Looking forward to getting back on the water for sure!   

[lifted250]

New carb dominator whooo


Sent from my iPhone using SoCal Jet Boats

[lifted250]

New carb dominator whooo


Sent from my iPhone using SoCal Jet Boats

[jyeager]

New carb dominator whooo


Sent from my iPhone using SoCal Jet Boats

what kind of motor is this going on? Details details 😮😁😁😁😁


Sent from my iPhone using SoCalJetBoats mobile app

[lifted250]

468 olds



Sent from my iPhone using SoCal Jet Boats

[lifted250]

468 olds



Sent from my iPhone using SoCal Jet Boats

[jyeager]

468 olds



Sent from my iPhone using SoCal Jet Boats

That's a whole lot of carb for an olds bud. 👍👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

[lifted250]

Nah  it's perfect


Sent from my iPhone using SoCal Jet Boats

[lifted250]

Nah  it's perfect


Sent from my iPhone using SoCal Jet Boats

[capogniracing]

That's a whole lot of carb for an olds bud. 👍👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

Agreed. Might wanna see what your heads will flow and figure out cam specs, and compression and give C&J a call to see if they can choke it down.


"RTCP"

[JordanDangerfield]

I had to see what she is going to look like.

[78Southwind]

I got this in the mail a couple days ago. I am going to add a 175 HP shot.

What's the best way per cubic dollar to retard the timing? I currently have a 6M-2 box. I have been looking at the Programmable Timing Computer since it's a good price but it looks like you have to lock out your distributor. I really don't want to lock out the timing. So now I am leaning towards the Digital Retard Control or a 6 plus. Any other ideas?

Also, I want to use my claysmith fuel pump (14 to 16 psi) to fuel both the main fuel system and the nitrous fuel system. I am looking at running two fuel regulators and dead head them at 6/7 psi. I also want to run a fuel safety switch on the nitrous fuel system. For the electrical, I am going to run a toggle switch to arm the nitrous system then a microswitch set for full throttle and a nitrous push button. Yada Yada... So does this sound good?

[capogniracing]

I got this in the mail a couple days ago. I am going to add a 175 HP shot.

What's the best way per cubic dollar to retard the timing? I currently have a 6M-2 box. I have been looking at the Programmable Timing Computer since it's a good price but it looks like you have to lock out your distributor. I really don't want to lock out the timing. So now I am leaning towards the Digital Retard Control or a 6 plus. Any other ideas?

Also, I want to use my claysmith fuel pump (14 to 16 psi) to fuel both the main fuel system and the nitrous fuel system. I am looking at running two fuel regulators and dead head them at 6/7 psi. I also want to run a fuel safety switch on the nitrous fuel system. For the electrical, I am going to run a toggle switch to arm the nitrous system then a microswitch set for full throttle and a nitrous push button. Yada Yada... So does this sound good?

(Attachment Link)

Just went/going through the same thing. I was thinking of a msd-6425 ignition and a msd- 8970 retard. A magnafuel 500 pump running both regulators. And I'm still gonna have locked out timing and a crank trigger. I would love to go with the Msd 6520 and think this is the best dollar for dollar but I need to be able to retard atleast 11 degrees and the 6520 only is capable to retard 9.9 which would work great for your set up. And maybe run a seperate fuel pump for nitrous to avoid a possible lean out. That's my 2 cents.


"RTCP"

[socaljst1970]

Opened up some UPS packages with goodies!  Full new set of Autometer gauges (including gps speedo) and our 1350 PTO!!

COME ON SUMMER!!!!!!!!!!!!

[81sprint]

Shaved 100 lbs off the motor with some new shiny parts