bowl interchange

« **on:** July 30, 2013, 09:21:47 AM »

Will a Berkley bowl interchange with an American Turbine AT-309 bowl. I t!oasted mine this weekend. Wear ring is loose with new insulator and the vanes are pretty jacked up. I dont have any picks. Want to find a resonable replacement to get back on the water.

« **Reply #1 on:** July 30, 2013, 09:56:15 AM »

I should of proof read last post. The wear ring will slip in and out very easily with new insulator into suction housing. I can push it in and out by hand. is there a cure for this condition? Or am I screwed. My bowl is still jacked and in need of a replacement.

« **Reply #2 on:** July 30, 2013, 10:41:14 AM »

What kind of Berkeley bowl you looking for. C bowl or split bowl?

« **Reply #3 on:** July 30, 2013, 10:50:28 AM »

A split if everything is a direct change over.

« **Reply #4 on:** July 30, 2013, 10:51:48 AM »

I have a c bowl that I would let go of for pretty cheap.

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

« **Reply #5 on:** July 30, 2013, 07:08:51 PM »

Are Berkeley bowls interchangeable with AT?

« **Reply #6 on:** July 30, 2013, 07:51:08 PM »

I think so? It might tell you on the Berkeley website?

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

« **Reply #7 on:** July 30, 2013, 08:20:02 PM »

The wear ring is in the suction housing, not the bowl.

The AT bowl will bolt to a berk suction, but the OD is larger and you'll need a different transom adapter

Patch

bowl interchange

Patch

Re: bowl interchange

SoCalPSD

Re: bowl interchange

Patch

Re: bowl interchange

santeerob619

Re: bowl interchange

Patch

Re: bowl interchange

santeerob619

Re: bowl interchange

lbhsbz

Re: bowl interchange