FAB(Ride Plate) can I do IT?

« **on:** July 10, 2007, 07:23:43 PM »

HEY GOT A ROGERS CYCLONE AND NEED A RIDE PLATE FOR THE JET. I HAVE UNLIMITED RESORCES FOR MACHINE WORK (TO A POINT) AND METAL (ALUM)((71))(63)) o STOCK / ANEILDED haha SO WHAT DO I NEED TO KNOW? AND DO YOU NEED SOME METAL?

bLUE eYED dEVIL-

« **Reply #1 on:** July 10, 2007, 07:28:40 PM »

Quote from: rogers roost on July 10, 2007, 07:23:43 PM

I HAVE UNLIMITED RESORCES FOR MACHINE WORK AND METAL

I think me and you need to talk!

« **Reply #2 on:** July 10, 2007, 07:34:27 PM »

OK BRO WHAT DO YOU NEED ? HAHA NOT TOO WILD! I AM JUST A LOWLEY MASTER JET MECH (SHEET METAL MECH/CARBON TECH) BUT HYDRAULICS IS MY SPECIALTY... I NEEEEEEED A DROOP SNOOP FOR MY JB.... NEED INFO
HEY YOUR SPECKS MY TIME GETS WHAT YOU WANT

« **Reply #3 on:** July 10, 2007, 07:38:26 PM »

I need this...Just without the Sanger engraving!

« **Reply #4 on:** July 10, 2007, 07:43:34 PM »

THE BLACK PIECES ARE? (WHAT) PLASTIC AND CAN YOU MEASURE THEM? (MIKE THEM) 7130 OK? CALL 760-382-3488

« **Reply #5 on:** July 10, 2007, 07:48:15 PM »

:oSTILL NEED AN ANSWER ABOUT THE RIDE PLATE!!!!!!!!!!!!

« **Reply #6 on:** July 10, 2007, 08:11:41 PM »

I would have to figure out measurments. It was a picture that Brad posted, I think the black is just foam.

What would something like that run?

Sorry to jack your thread

« **Reply #7 on:** July 10, 2007, 08:24:44 PM »

NO WORRIES... JUST WANT EVERYONE TO KNOW I DON'T WORK FOR FREE. "YOU SCRATCH MY BACK AND I'LL SCRATCH YOURS' "
NO GAY SH!T K! I AM HERE FOR YOU!!!!!!!!

« **Reply #8 on:** July 10, 2007, 08:28:55 PM »

i would never expect someone to work for free.... i dont.

Quote from: rogers roost on July 10, 2007, 08:24:44 PM

"YOU SCRATCH MY BACK AND I'LL SCRATCH YOURS' " NO GAY SH!T K!

Damn I was half way to the bottle of oil until u said that!.

« **Reply #9 on:** July 10, 2007, 08:33:02 PM »

HEY I DO HAVE TIG WELDER AND COULD FAB UP A WAY COOLER IDEA. YEAH?(ROLLIN NICKELS) YES HEHE... WE COULD SPLIT THE CREDIT... OR MAKE IT A SOCAL THING !!!!!!
\

BLUE EYED DEVIL

« **Reply #10 on:** July 10, 2007, 09:33:33 PM »

Quote from: rogers roost on July 10, 2007, 07:48:15 PM

:oSTILL NEED AN ANSWER ABOUT THE RIDE PLATE!!!!!!!!!!!!

I'm sure that Ralph or Beerjet will chime in and give you the low down.

« **Reply #11 on:** July 10, 2007, 09:45:29 PM »

I'm sure you can do it as long as you have the measurements AND the intake has to come out . That is usually a bitch .

-beerjet-

« **Reply #12 on:** July 10, 2007, 10:01:26 PM »

I know they're sensitive on their adjustment in how changes made to the ride plate affect the boat...

« **Reply #13 on:** July 11, 2007, 07:55:58 PM »

Sorry about being so scatter brained . The only bitch will be getting the right shoe or at least a close one so your set-up isn't completely fuked up . Also get an angle for the ride plate to sit at . This is a huge can of adjustable worms so try not to make too many changes at once .

Start with one item like a handfull of shoe's. Some folks will let you barrow them so you can find the one that works on your boat so long as one provide at least one . Armed with a GPS so you can track progress (good or bad) .
Once you optimized performance with that you move onto the next thing. I'm sure with your backround you know how to go from one thing to the next.

Let me get you some names so you can familiarize yourself with the rogers . Rigger I'm sure has alot of helpfull info as well .

-beerjet-

« **Reply #14 on:** July 13, 2007, 09:04:08 PM »

thanks bro (beerjet) i am on hold i may have deal on a blower set up( homeboy beached his sh!t )((haha)) he loves his wiskey...

« **Reply #15 on:** August 06, 2007, 07:51:43 PM »

Quote from: OC2Vegas on July 10, 2007, 07:38:26 PM

I need this...Just without the Sanger engraving!

I wish I could see the connection to the trailer.

« **Reply #16 on:** August 23, 2007, 09:29:29 PM »

Quote from: rogers roost on July 10, 2007, 07:23:43 PM

HEY GOT A ROGERS CYCLONE AND NEED A RIDE PLATE FOR THE JET. I HAVE UNLIMITED RESORCES FOR MACHINE WORK (TO A POINT) AND METAL (ALUM)((71))(63)) o STOCK / ANEILDED haha SO WHAT DO I NEED TO KNOW? AND DO YOU NEED SOME METAL?

bLUE eYED dEVIL-

dude you've got my old Rogers!
last i saw it was in the 909 and the new owner had trashed it good. looked like he left it outside in the dirt with no cover for a year. also looked like he ran into and over a bunch of shit. does the trailer still have airbags on it?

« **Reply #17 on:** August 23, 2007, 09:35:08 PM »

Quote from: cyclone on August 23, 2007, 09:29:29 PM

dude you've got my old Rogers!
last i saw it was in the 909 and the new owner had trashed it good. looked like he left it outside in the dirt with no cover for a year. also looked like he ran into and over a bunch of shit. does the trailer still have airbags on it?

I could be mistaken but I think that Roger's is for sale again...

« **Reply #18 on:** August 23, 2007, 09:38:23 PM »

Quote from: cyclone on August 23, 2007, 09:29:29 PM

dude you've got my old Rogers!
last i saw it was in the 909 and the new owner had trashed it good. looked like he left it outside in the dirt with no cover for a year. also looked like he ran into and over a bunch of shit. does the trailer still have airbags on it?

Here it is:

http://www.socaljetboats.com/index.php/topic,1508.msg18139/topicseen.html#new

« **Reply #19 on:** August 23, 2007, 09:43:41 PM »

son of a gun thats it.

« **Reply #20 on:** August 23, 2007, 11:00:10 PM »

Quote from: cyclone on August 23, 2007, 09:43:41 PM

son of a gun thats it.

sure looks better then you described it

« **Reply #21 on:** August 24, 2007, 09:23:19 PM »

i hope it is. It was for sale about a year ago and i went to check it out on behalf of my cousin, who was looking for a jet boat. Since i restored it just a couple years before i knew it would be a good boat for him. When i went to check it out in Norco i couldt believe how trashed it was. my jaw hit the floor. the guy that owned it literally destroyed it. front to back, top to bottom it was messed up. I hope the new owner has fixed it up. it was a super nice boat when i sold it.

« **Reply #22 on:** August 25, 2007, 08:49:46 AM »

Quote from: cyclone on August 24, 2007, 09:23:19 PM

i hope it is. It was for sale about a year ago and i went to check it out on behalf of my cousin, who was looking for a jet boat. Since i restored it just a couple years before i knew it would be a good boat for him. When i went to check it out in Norco i couldt believe how trashed it was. my jaw hit the floor. the guy that owned it literally destroyed it. front to back, top to bottom it was messed up. I hope the new owner has fixed it up. it was a super nice boat when i sold it.

Not that my boat is in anyway shape or form cherry , but it's my baby and if I were to sell it and then run across it again in even worse (if thats possible) condition . I'd turn and run away cryin like a 6 year old girl .

-beerjet-

« **Reply #23 on:** September 07, 2007, 12:09:39 PM »

I don't think anyone could have put it better Beerjet. You hit the nail RIGHT on the head my friend.

rogers roost

OC2Vegas

rogers roost

OC2Vegas

rogers roost

rogers roost

OC2Vegas

rogers roost

OC2Vegas

rogers roost

hotrod56cars

beerjet

hotrod56cars

beerjet

rogers roost

GAWnCA

cyclone

hotrod56cars

hotrod56cars

cyclone

Brad @ SCJB

cyclone

beerjet

UNDONE