Null


diesel_lv

  • Karma: +0/-0
How to clean out pump?
« on: May 10, 2015, 10:23:05 PM »
I bought a TX-19 in Jan. The pump is set back to where the inspection cover is half in and half out of the transom. On my current boat I can pull the back of the boat on shore and pull the cover to clean out debri s that gets into the pump. Does anyone know how to clean out the pump with the cover half in and half out with the aluminum transom plate sealed to it? The reason I ask is down at Pirate Cove, I have had to clean out my pump on 4 different occasions to get the boat to move.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1976 19' Waikiki. 4.6 Ford DOHC aluminum block w/turbo. Legend stage II pump, AA impellar, split bowl, droop, cable place diverter. Not pretty, but Fun!!

GT Jets

  • Karma: +192/-0
Re: How to clean out pump?
« Reply #1 on: May 10, 2015, 10:40:40 PM »
man i miss ronald reagan he wood f*** that little a**hole up :banghead:

The one major drawback to a set back pump.

Not saying your screwed, but you will need to build yourself a snot hook.

Basically a rod with a hook on the end and tee handle.

You will need to go in from underneath through the loader grate.

GT

Sent from my SCH-I545 using SoCal Jet Boats mobile app

  • Boat #1: 1992 Carrera 20.5 Elite (I/O bitches)
  • Boat #2: 19' Bubble deck Jet BBC Berkeley
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
If i get some free time tonight at work, ill play with it and post it for everyone to see.

Time to man up and yank it John!  :banghead:
Ray

jyeager

  • Karma: +62/-0
Re: How to clean out pump?
« Reply #2 on: May 10, 2015, 11:28:54 PM »
No getting the clean out open with a half set back. You'll have to do what gt said


Sent from my iPhone using SoCalJetBoats mobile app
  • Boat #1: Southwind Tunnel Dragster 19
  • Boat #2: DiMarco18 V-Bottom
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

crewchief22

  • Karma: +66/-0
Re: How to clean out pump?
« Reply #3 on: May 11, 2015, 05:51:31 AM »
It also helps to avoid Pirates Cove.  I have one discolored header from that place  :mad:
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

Your Mom

  • Karma: +20/-0
Re: How to clean out pump?
« Reply #4 on: May 11, 2015, 06:31:15 AM »
Pull the trans plate off an cut out that area... Weld in a half circle.

diesel_lv

  • Karma: +0/-0
Re: How to clean out pump?
« Reply #5 on: May 11, 2015, 09:07:04 AM »
Your Mom, thanks. The most obvious escaped me. I have a friend who is a Great aluminum welder. This past March, the river was so high and full of debris from shore that after 40 miles I eventually got a thick reed in the pump between impeller and wear ring. That was the worst to get out. No hook would've worked. Thanks for the idea!
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1976 19' Waikiki. 4.6 Ford DOHC aluminum block w/turbo. Legend stage II pump, AA impellar, split bowl, droop, cable place diverter. Not pretty, but Fun!!

JARVIS

  • Karma: +18/-0
Re: How to clean out pump?
« Reply #6 on: June 01, 2015, 12:53:39 AM »
while i havent had the pleasure of having to clean out impeller....
i am sure if water level ends up lower than clean out opening....you should be good.  if you were able to park boat on shore stern first and clean out is higher than water level....should be able to clean out what ever you need to for as long as water remained lower than opening.
  • Boat #1: '81 tahiti mini day cruiser
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
-JARVIS-

 


Null

SMFPacks CMS 1.0.3 © 2026