Lost my mind!

« **on:** April 23, 2011, 05:27:15 PM »

Well at least a little

Pump was making a growl noise the last couple trips out so...

Out it comes.

« **Reply #1 on:** April 23, 2011, 05:28:29 PM »

What do you mean I didn't have to pull the intake housing?

« **Reply #2 on:** April 23, 2011, 05:32:33 PM »

WTH Keith

Didn't know ya had to take the intake out to fix a growl

Did ya have a leak

« **Reply #3 on:** April 23, 2011, 06:20:38 PM »

Both fins on the intake were busted up pretty bad so I decided to pull it out and fix it while the pump was out.

« **Reply #4 on:** April 23, 2011, 06:28:50 PM »

Thought maybe we needed to send the guys with the white jackets over to your house

Did you have a hard time getting the intake out

« **Reply #5 on:** April 23, 2011, 06:45:53 PM »

Only took a little while

About 4 hours

« **Reply #6 on:** April 23, 2011, 07:24:43 PM »

ok since you have already lost your mind

put a berk in it $:-\$

« **Reply #7 on:** April 23, 2011, 08:16:04 PM »

Uhhh . . . hate to be the one to tell you but, you didn't need to pull the motor out either.

« **Reply #8 on:** April 23, 2011, 08:35:03 PM »

Quote from: GlassCutter on April 23, 2011, 08:16:04 PM

Uhhh . . . hate to be the one to tell you but, you didn't need to pull the motor out either.

Ssshhhhhh, I'm trying to convince the driver that it needs more power.

I had authorization for a few upgrades until she came back down from her pain medicated happy.

« **Reply #9 on:** April 23, 2011, 09:52:21 PM »

Is yours the delta bottom too? I ended up putting a round radius intake into the Hondo so I could go to the round bottom.... not sure how much of a difference it makes, it was an ass dragger with the flat bottom thou.

For a few bucks you could piece together a Berk

« **Reply #10 on:** April 24, 2011, 07:58:23 AM »

So whats the plan Keith gonna trick out the WJ or go for the "Sex change"

« **Reply #11 on:** April 24, 2011, 08:47:28 AM »

Quote from: pw_Tony on April 23, 2011, 09:52:21 PM

Is yours the delta bottom too? I ended up putting a round radius intake into the Hondo so I could go to the round bottom.... not sure how much of a difference it makes, it was an ass dragger with the flat bottom thou.

For a few bucks you could piece together a Berk

Quote from: jet boat performance on April 24, 2011, 07:58:23 AM

So whats the plan Keith gonna trick out the WJ or go for the "Sex change"

Still weighing my options.

The original intake is for a flat keel (delta pad), I have an intake for a rounded keel (thanks Ray) that I could install but I don't know if I'm ready to rebuild the bottom yet.

I've thought about getting a Berk for it but I haven't tripped over any in the standard SCJB price range

« **Reply #12 on:** April 24, 2011, 09:01:13 AM »

One thing i know for sure is, the driver of that boat isnt gonna be happy if there is excess down time...

« **Reply #13 on:** April 24, 2011, 09:28:53 AM »

Quote from: Nordie on April 24, 2011, 09:01:13 AM

One thing i know for sure is, the driver of that boat isnt gonna be happy if there is excess down time...

She is already on my ass about when it will be done

« **Reply #14 on:** April 24, 2011, 03:23:40 PM »

Shouldn't be a lot of work to put in the other intake. But yeah, you are THIS far down, a Berk would sure be nice!

Ray

« **Reply #15 on:** April 24, 2011, 03:29:40 PM »

Quote from: crewchief22 on April 24, 2011, 08:47:28 AM

Still weighing my options.

The original intake is for a flat keel (delta pad), I have an intake for a rounded keel (thanks Ray) that I could install but I don't know if I'm ready to rebuild the bottom yet.

I've thought about getting a Berk for it but I haven't tripped over any in the standard SCJB price range

It took me 2 days to set the intake and build the bottom to a round keel, on my back under the boat

Kinda wish I flipped it though.

« **Reply #16 on:** April 24, 2011, 04:14:39 PM »

I am seriously considering flipping the boat and working the bottom. It has several deep scratches that need repair and the places where the original fuel tank mounts were located are still a little out of shape after being repaired on my back (not fun).

« **Reply #17 on:** April 24, 2011, 04:56:46 PM »

This is the Driver...quit posting on here and get my boat done!

« **Reply #18 on:** April 24, 2011, 06:20:45 PM »

Ha! Kick his ass in gear! River season is here

« **Reply #19 on:** April 24, 2011, 07:34:55 PM »

Quote from: crewchief22 on April 24, 2011, 04:56:46 PM

This is the Driver...quit posting on here and get my boat done!

Create your own account if you want to post here

« **Reply #20 on:** April 29, 2011, 09:02:29 AM »

Flip that bitch! setback the pump,shoe and ride plate, it will wake that bad boy up

crewchief22

crewchief22

76NORDIC

crewchief22

76NORDIC

crewchief22

Ralph Brunt

GlassCutter

crewchief22

pw_Tony

jet boat performance

crewchief22

Nordie

crewchief22

IRRebel

pw_Tony

crewchief22

crewchief22

Willow Wog

crewchief22

HONDO_JET