Need help identifying pump..

« **on:** June 22, 2015, 02:32:45 PM »

Hey I just picked up this Daytona a few weeks ago. I am looking to get a place diverter for it. I need help identifying this pump. It's a Berkeley I'm pretty sure, just can't find any model numbers on it. The previous owner told me it was a larger bowl. Any help would be appreciated, thanks.

Sent from my iPhone using Tapatalk

« **Reply #1 on:** June 22, 2015, 02:48:02 PM »

That looks like the dominator that came in my boat. Mine happened to be serial number 20! Very early and no ribs on the suction housing. Nozzle looks the same. Make sure you get a Dom diverter or swap the droop. Dom steering oring diameter is a little larger. I haven't run mine yet but I think it's going to leak around the Teflon because I have a standard diverter.

« **Reply #2 on:** June 22, 2015, 02:48:46 PM »

I could be way wrong here but I think most if not all berk bowls have two oil fills on them that almost looks like my dominator bowl check the side of the suction housing it should say the brand on it

Sent from my iPhone using SoCalJetBoats

« **Reply #3 on:** June 22, 2015, 02:57:26 PM »

X3 on early Dominator. They are water lubricated not oil like a Berk.

If you measure the OD of the bowl it is a little bigger than a normal Berk.

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** June 22, 2015, 03:37:58 PM »

Thanks for the quick replies fellas. My next question, is this a nice set up? I know it has had some work done to it, I can see a inducer impeller in there, looks like a aftermarket cone in there also. I plan on going through the whole boat in the winter, during that time rebuilding the pump if needed. This is my first jet boat so all this is a learning curve for me.

Sent from my iPhone using Tapatalk

« **Reply #5 on:** June 22, 2015, 04:21:52 PM »

Quote from: bkillgore01 on June 22, 2015, 03:37:58 PM

Thanks for the quick replies fellas. My next question, is this a nice set up? I know it has had some work done to it, I can see a inducer impeller in there, looks like a aftermarket cone in there also. I plan on going through the whole boat in the winter, during that time rebuilding the pump if needed. This is my first jet boat so all this is a learning curve for me.

Sent from my iPhone using Tapatalk

yes the dominator pumps are really strong the only thing I could see that you would want to add would be a diverter on it if it doesn't have one already but 👍on the boat congrats

Sent from my iPhone using SoCalJetBoats

« **Reply #6 on:** June 23, 2015, 09:43:35 AM »

It doesn't have a place diverter, that's my next purchase. My next question would be, hydraulic or manual diverter? Which do you guys feel is a better set up

Sent from my iPhone using Tapatalk

« **Reply #7 on:** June 23, 2015, 10:36:16 AM »

It also has Calgo

Sent from my iPhone using SoCal Jet Boats

« **Reply #8 on:** June 23, 2015, 01:18:13 PM »

Yes I know it has the calgo steering set up, will that affect which set up I will need for the diverter?

Sent from my iPhone using Tapatalk

« **Reply #9 on:** June 23, 2015, 06:28:23 PM »

No it won't

Sent from my iPhone using SoCal Jet Boats

bkillgore01

Need help identifying pump..

evilb

Re: Need help identifying pump..

carrera202

Re: Need help identifying pump..

philofab

Re: Need help identifying pump..

bkillgore01

Re: Need help identifying pump..

carrera202

Re: Need help identifying pump..

bkillgore01

Re: Need help identifying pump..

lifted250

Re: Need help identifying pump..

bkillgore01

Re: Need help identifying pump..

AnthonyH3

Re: Need help identifying pump..